Polyurethane

Isocyanate used for polyurethane production. It is suitable for microcellular polyether foam with a molded density of 650-1000 Kg/m3. It is used to manufacture soles.  Benefits: Offers very good flex resistance even at low temperatures Provides hydrolysis resistance and non-slip properties

Polyol used for polyurethane production. It is suitable for microcellular polyether foam with a molded density of 650-1000 Kg/m3. It is used to manufacture soles.Benefits:Offers very good flex resistance even at low temperatures Exhibits hydrolysis resistance and non-slip properties

LAYKOLD MASTERS FLEX FILL

Filler layer used before applying Laykold Masters Topcoat recommended for sports applications. It is a prefilled, single-component acrylic latex emulsion.Benefits:Contains no asbestos, lead and mercuryMixing ratio of Laykold Masters FlexFill : Water is 5:1

LAYKOLD MASTERS LINE PAINT

Acrylic emulsion used in marking of lines on Laykold coatings. Recommended for sports applications.Benefits:It is a water-based and solvent-freeIt is applied in one to two coats using a narrow paint roller

LAYKOLD MASTERS LINE PRIME

Acrylic emulsion recommended for sports applications.Benefits:It is 100% acrylic base with a clear finish once curedIt seals gaps between masking tape and surface covering

LAYKOLD MASTERS SEALER

Acrylic emulsion for sealing of pores in rubber granulate mats. Recommended for sports applications.Benefit: It is free of solvents

LAYKOLD MASTERS TC

Acrylic latex emulsion used as a hard-court wear layer for tennis and multi-sports facilities. Benefits: It is wear-resistantIt has a 100 % acrylic base

LAYKOLD MASTERS TC FINISH

Acrylic emulsion used as a hard-court topcoat sealant for tennis and multi-sports facilities. Benefits: It is wear-resistantIt has a 100 % acrylic base