Rubber

VITON™ B50

Fluorinated hydrocarbon rubber (FKM). It is a vitan B polymer.

VITON™ B600

Fluoroelastomer (FKM) highly recommended for molded goods like shaft seals and calendered goods such as flue duct expansion joints. It is a gum polymer especially suited to curing with bisphenol system. Benefits: Displays improved compression set resistance, terpolymer processing & compression molding, extrusion and calendering Shows easier mold release & increased mold flow and cure rate Demonstrates lower compound viscosity, excellent heat and fluid resistance characteristicMooney Viscosity, ML (1+10) at 121 °C is 65

VITON™ B601C

Terpolymer Fluoroelastomer (FKM) used in O-rings, gaskets and other molded parts. Benefits: Provides excellent compound flow in compressions, injection and transfer molding parts Offers fully precompounded O-ring curative level, improved compression set and medium to fast cure rate Demonstrates improved processing properties such as better mixing & better mold release with less mold fouling and excellent scorch safety 

VITON™ B651C

Fluoroelastomer (FKM) used in compression, transfer & injection molding of O-rings, gaskets, valve stem, crankshaft seals and complex-shaped parts.Benefits:Provides excellent compound flow in compressions, injection and transfer molding partsDemonstrates improved processing properties and better metal adhesionDisplays fully precompounded with curative & metal adhesion promoter and good metal bonding with standard industrial primersShows improved processing by better mixing & demolding hot tear, increased mold flow and easier mold release with less mold fouling

VITON™ B PEL

Fluorinated hydrocarbon rubber (FKM) grade.

VITON™ B SHE

Fluorinated hydrocarbon rubber (FKM) grade.

VITON™ E430

Fluorinated hydrocarbon rubber (FKM) grade for bisphenol cure system.

VITON™ E45

Fluorinated hydrocarbon rubber (FKM) grade used principally in lathe-cut gaskets, double- & triple-lip seals and miscellaneous complicated molded goods. Suitable for tubing, roll covers, coatings and other calendered goods. It can be compounded with curing agents and curative masterbatches.Benefits:Provides improved compression set resistanceOffers good balance of heat and fluid resistanceIt is the polymer of choice for extrusion, mold flow, hot demolding strength and vulcanizate tear strengthIt yields good tensile strength and elongation at high temperaturesMooney Viscosity, ML 1 + 10 at 100 °C is 50