Polyurethane

Jagropol-912 is a polyol suitable for general industrial floorings, PU and metal coatings.Benefits:It is a castor oil-based, VOC-free, medium-hard, hydrophobic materialProvides coatings with a medium-hard surface and good chemical and water resistanceOffers excellent corrosion protection along with superior hydrolytic stability and humidity resistanceUpon crosslinking with aromatic polyisocyanates forms polyurethane systems

Jagrocrete-EM102 is a polyol designed for water-thinnable, cementitious polyurethane floor coatings. Shelf life: 12 months.Benefits:Derived from natural vegetable oilIt is solvent-freeProvides excellent physical and chemical properties, such as high load-bearing capacity and resistance to heat, abrasion, impact, and chemicalsTypical Applications:It is suitable for use in water-settable cementitious floor coating systems for warehouses, wastewater treatment facilities, and industrial facilities.

Diprane™ LC 1010 polyol

Polyol suitable for industrial and other polyurethane applications. It can be used for the production of a range of polyurethane elastomers from 45 to 95 Shore A hardness. Shelf life: 12 months.Benefits:Offers a high degree of dynamic performance with excellent physical properties and abrasion resistanceDeveloped specially to utilize a catalyst packageAllows to tailor the reactivity to suit the molding process

Diprane™ LC 1025 FC polyol

Polyol used to produce a range of polyurethane elastomers from 55 Shore A to 55 Shore D hardness. It is also suitable for industrial use. Shelf life: 12 months.Benefits:Offers dynamic performance with good physical properties and abrasion resistanceComplies with EU Commission Regulation 10/2011 for plastics in contact with food and its amendments

Voramer™ MM 2534 polyol

Polyol used in industrial sites and polyurethane applications. Shelf life: 6 months.

Vorastar™ HB 6589 isocyanate

Diphenylmethane diisocyanate suitable for industrial and other polyurethane applications. Shelf life: 6 months.Benefits:It is a low viscosity liquid

NIAX™ PM-20 PLUS

Tertiary amine catalyst designed for the manufacture of rigid polyurethane foam by continuous lamination. It is also used in continuous production of metal panels, insulations boards and boardstocks.Benefits:It is a strong blowing and moderate gel catalystProvides blowing efficiency and contributes to foam core hardeningImproves surface cure, adhesion and flatness