STRUKTOL® PERMALEASE 10
Mold release agent designed for rubber and plastic processing. It is a solvent-based semi-permanent agent.Benefits:Allows many releases without renewal of filmReduces mold contaminationNo fluorochlorohydrocarbons
You are currently visiting the Safic-Alcan Ireland website.
Supplier
S&S Struktol
About
The Schill+Seilacher Group, founded in 1877 was held in private ownership until 2019 when it transitioned into a foundation. The group operates five plants located in Germany and the USA and serves a number of important market sectors globally with innovative speciality additives and products. The Hamburg location acts as headquarters for the groups’ rubber additives business, under the well-known Struktol® trademarkS&S Struktol
The Schill+Seilacher Group, founded in 1877 was…
- STRUKTOL
STRUKTOL® TR 121
Mold release agent and lubricant for rubbers. It also serves as a slip and dispersing agent for the production of polyethylene films and EVA copolymers, Also suitable for paper & paperboard components, packaging material, closures and sealing gaskets for food related applications.Benefits:Shows faster migration and lower heat stabilitySuitable for injection molding
STRUKTOL® 40 MS FLAKES
Homogenizing agent and plasticizer for elastomers. It is a mixture of dark aromatic and aliphatic hydrocarbon resins.Benefits:Promotes formation of compact massDisplays reduced bagging tendency, increased extrusion rates without increasing die swell and improved calendering propertiesBoosts efficiency of other tackifying agents and does not harden during vulcanizationShows good solubility in aromatic and chlorinated hydrocarbons
STRUKTOL® LV 418
Thickening agent designed for natural latex rubber. It is suitable for polymer dispersions and other aqueous systems. It is an aqueous solution of ammonium salt of methacrylic acidacrylic ester copolymer. Benefits:UV stableReady-to-use
STRUKTOL® PERMALEASE 10 SPRAY
Mold release agent developed for rubber and plastic processing. It is solvent-based semi-permanent agent. Benefits:Reduces mold contaminationAllows many releases without renewal of filmShows no transfer of film on molded article
STRUKTOL® WS 280 PASTE
Processing additive designed for FPM compounds. This organosilicones based ingredient is suitable for extrusion and injection molding.Benefits:Helps to reduce mold fouling, give excellent flow and release propertiesShows high compatibility with rubber compoundsOffers extremely low volatility at high temperaturesProvides lubrication without exudation or bloom