Rubber

VULCOFAC® TMTD MB80N

VULCOFAC® TMTD MB80N is an accelerator which can used as both primary or secondary (ultra) accelerator in multiple blend accelerator systems with thiazoles and sulfenamides. It is also used as a vulcanizing agent (Sulphur donor) in most of the sulfur cured elastomers. Shelf life: 12 months.Benefits:Functions as granulated masterbatch which contains pre-dispersed rubber chemicalsIt is virtually dust-free which enables clean and safe handlingActs as a scorch retarder without affecting the cure speed in mercaptan modified polychloroprene cured with ETU and TMTDOffers improved handling and mixing propertiesEnsures rapid mixing and good dispersion in a wide range of elastomersExhibits excellent flow properties which provides optimal results in automatic dosing systemsProvides fast vulcanization and an excellent vulcanization plateauWhen used in sulfurless vulcanization systems and EV systems, it also offers good heat aging and compression set resistance

VULCOFAC® MBTS MB75N

VULCOFAC® MBTS MB75N is a primary accelerator suitable for rubber applications. It also functions as granulated masterbatch which contains pre-dispersed rubber chemicals. Shelf life: 12 months.Benefits:Acts as scorch retarder in non-sulfur modified polychloropreneOffers improved handling and mixing propertiesEnsures rapid mixing and good dispersion in a wide range of elastomersExhibits excellent flow properties which provides optimal results in automatic dosing systemsIt is virtually dust-free which enables clean and safe handlingIt can be used as an alternative when MBT is too scorcyHas slightly better aging and reversion resistanceProvides medium fast curingIt also offers moderate processing safety and moderately fast cures with a flat plateauIt can be boosted by the use of secondary accelerators to achieve a faster cure and a higher modulusTypical Applications:Ideal for all sulfur curable elastomers.

VULCOFAC® TBZTD MB70N

VULCOFAC® TBZTD MB70N is a primary and secondary accelerator suitable for rubber curing. Shelf life: 12 months.Benefits:Acts as a fast-curing, sulfur donor materialIt is dust-free and shows excellent flow propertiesIt is a masterbatch containing pre-dispersed rubber chemicalsEnsures rapid mixing and good dispersionEnables clean and safe handlingOffers optimal results in automatic dosing systemsTypical Applications:Recommended for NR, SBR and NBR elastomers.

Onyx Elite® 339

Onyx Elite® 339 is a flame retardant and filler suitable for cast polymer industry. It is a low surface area, medium particle size flame retardant and smoke suppressant alumina.Benefits:It is a color controlled high-purity, organic-free alumina trihydrateProvide translucency, depth of pattern and soft white colorIt is a high brightness product exhibiting a unique particle size distributionControlled coarse fraction and high fine fraction for rapid resin dispersionExcellent mold flow and wet-out characteristicsExhibits the best combination of viscosity and air releaseOffers minimal porosity, even pigmentation, and excellent filler reinforcement throughout the molded part

THIXON™ P-11-DX

THIXON™ P-11-DX is a solvent-based rubber-to-substrate bonding agent for polar elastomers (NBR and ACM). It is also used as a one-coat adhesive. Shelf life: 720 days.Benefits:Formulated with reactive polymers and pigments in a MEK and xylene-based systemIt is an MIBK-free primer designed for use with MEGUM™ or THIXON™ cover coatsFree from reportable levels of lead and toxic heavy metals

JETFINE® 2

Jetfine® 2 is an ultrafine talc recommended for rubber applications.Benefits:It has a high brightnessDelivers impact and scratch resistanceTalc with natural origin & very fine particle sizeEnhances dimensional stability with reduced shrinkage and thermal expansionCompatible with alloys based on PA, engineered plastics, ABS, PC, PBT and polyestersFood contact approved and lowers the carbon footprintSuitable for injection moldingTypical Applications:Ideal for exterior and interior automotive parts, electronic housings and biopolymer packaging applications. It is sed in automotive exterior parts such as bumpers, fenders, fascias, body panels, and rocker panels.

IMERCARB™ 24

IMERCARB™ 24 is a filler suitable for rubber applications. It is a grounded calcium carbonate produced from high quality crystalline marble.Benefits:Reduces moisture pickup and improves dispersionProvides electrical insulation, modifies elasticity, and improves mold releaseIt has high brightnessEnables higher loading capacity and improved particle packingTypical Applications:Recommended for tires, seals, hoses, footwear, cable sheathing and insulation.

MAGNIFIN® H-5 MV

MAGNIFIN® H-5 MV is a halogen-free, flame retardant suitable for rubber applications.Benefits:It is a high-purity magnesium hydroxide, based on mineralIt is modified with a polymeric surface treatmentProvides low smoke emissionNo toxic or corrosive gases generated during decomposition processIt exhibits thermal stability up to 340°CShows compatibility with fillers and polymer matrixOffers improved processing, mechanical and electrical propertiesTypical Applications:Recommended for thermoplastic, crosslinked polyolefins and rubber compounds.