Rubber

Silopren™ LSR 2739

Silopren™ LSR 2739 is a two-component liquid silicone rubber suitable for rubber applications. Shelf life: 730 days.

Silopren™ LSR CP WHITE HC

Silopren™ LSR CP WHITE HC is a color paste recommended for rubber applications. Shelf life: 1080 days.Benefits:Exhibits high resistance to ozone, ultraviolet (UV) light, ageing, and weatheringOffers good dielectric and mechanical propertiesProvides excellent high-temperature stability with good low-temperature flexibility

THIXON™ P-6-EF-X

THIXON™ P-6-EF-X is a rubber-to-substrate bonding agent. It is suitable for adhering to metals (hot & cold rolled steel, stainless steel, aluminum & brass) and thermoplastics (polyamides and polyesters). Shelf life: 18 months.Benefits:Solvent-based MIBK-free primerConsists of reactive polymers and pigments in methyl ethyl ketone (MEK), toluene, aromatic and paraffinic hydrocarbonsFree from reportable levels of lead and toxic heavy metalsIt is used in combination with MEGUM™ or THIXON™ cover coats especially THIXON™ 814-2 or THIXON™ OSN-2-EF-VTypical Applications:It is used as one-coat adhesive for styrene butadiene rubber and chloroprene.

Onyx Elite® 339

Onyx Elite® 339 is a flame retardant and filler suitable for cast polymer industry. It is a low surface area, medium particle size flame retardant and smoke suppressant alumina.Benefits:It is a color controlled high-purity, organic-free alumina trihydrateProvide translucency, depth of pattern and soft white colorIt is a high brightness product exhibiting a unique particle size distributionControlled coarse fraction and high fine fraction for rapid resin dispersionExcellent mold flow and wet-out characteristicsExhibits the best combination of viscosity and air releaseOffers minimal porosity, even pigmentation, and excellent filler reinforcement throughout the molded part

SILOPRENLSR CP REDDISH BROWN

LSR CP Reddish Brown is a coloring paste especially for coloring LSR.Benefits:Does not affect mechanical and electrical properties of the vulcanizatesExhibits reddish-brown shade with an approximate RAL color reference of 3011Features high temperature stabilityProvides high stability to ozone and ultraviolet lightDelivers outstanding ageing behavior and weathering resistanceHas good dielectric and mechanical propertiesOffers excellent stability and flexibility at low temperatures

THIXON™ P-11-DX

THIXON™ P-11-DX is a solvent-based rubber-to-substrate bonding agent for polar elastomers (NBR and ACM). It is also used as a one-coat adhesive. Shelf life: 720 days.Benefits:Formulated with reactive polymers and pigments in a MEK and xylene-based systemIt is an MIBK-free primer designed for use with MEGUM™ or THIXON™ cover coatsFree from reportable levels of lead and toxic heavy metals

ULTRASIL® VN 3 GR SILQUIMICA

ULTRASIL® VN 3 GR SILQUIMICA is a precipitated silica used as a reinforcing filler in all kinds of rubber applications.Benefits:It is a mechanically compacted granulateThe granulation process leads to less dust development during mixingExhibits high reinforcing potentialOffers high shore hardness, tensile strength, tear resistance and abrasion resistanceProvides vulcanizates of excellent transparency due to higher surface areaRegistered under REACH (Europe), ENCS (Japan), KECI (Korea), NZIoC (New Zealand), AICS (Australia), PICCS (Philippines), IECSC (China), DSL (Canada), and TSCA (USA)Typical Applications:Recommended for tires, mechanical rubber goods, cables and shoe soles applications.

Silopren™LSR 4640

Silopren™LSR 4640 is a two-component liquid silicone rubber.Benefits:Suitable for injection molding processesExhibits high reactivity, low viscosity and high tear strength with shorter cycle timeProvides excellent thermal stability and low cyclic contentOffers high stability to ozone and ultraviolet lightIt is sterilizable with ethylene oxide, steam and gamma radiationEnables long service life at dynamic stressThe viscosity values measured according to DIN 53018 at 20°C and a shear rate of 10 s⁻¹ are 320 Pa-s for part A and 290 Pa-s for part BIt is biocompatible according to USP CLASS VI and ISO 10993Listed in BfR recommendation XV “Silicones” and LII “Fillers"Compliant with 21 CFR 177.2600Typical Applications:Recommended for production of parts for healthcare devices such as variety of molded fluid and drug delivery device components, respiratory masks, sterilization mats, diaphragms, o-rings and infant care applications.