Rubber

Silopren™LSR 7080HP

Silopren™LSR 7080HP is an optically clear, platinum cured, liquid silicone rubber (LSR). It has a shelf life of 563 days.Benefits:It is a cross linkable and two-component resin and is available as 1:1 ratio by weightExhibits excellent heat resistance, low to no flash, short vulcanization time and easy de-moldingIt has a lower impact on the environmentOffers good electrical conductivity with deep and thin-section cure capabilityIt is suitable for processing by injection moldingTypical Applications:It is used for automotive, aerospace, consumer goods, electrical and electronic applications. It is also s also used for energy and healthcare applications.

Silplus™ 40 HS

Silplus™ 40 HS is a one-component, heat cured silicone rubber (HCR) based on peroxide catalyst system. It has a shelf life of 730 days.Benefits:Possesses high strength, enhanced mechanical performance, low hysteresis and high resilienceIt is a ready-to-use, one-component resinExhibits low compression set, high clarity and good processabilityOffers rapid cure times and relatively low odor during fabricationIt can be processed by injection, compression & transfer molding, extrusion and calendaringConforms to FDA 21 CFR 177.2600 for indirect food contact, USP Class VI, ISO 10993 part 6, 10 & 11 testing and BfR XV requirementsTypical Applications:It is suitable for consumer goods, electrical/electronics, energy and healthcare. It can also be used in automotive, aviation and aerospace.

Silplus™ 70 HT

Silplus™ 70 HT is a high temperature, heat-cured silicone rubber (HCR). It has a shelf life of 730 days.Benefits:It is based on peroxide catalyst systemExhibits enhanced mechanical performance, low hysteresis and high resilienceIt is a ready-to-use, one-component resinOffers rapid cure times and relatively low odor during fabricationShows low compression set, high clarity and good processabilityIt can be processed by injection, compression & transfer molding, extrusion and calendaringTypical Applications:Ideal for automotive, aviation and aerospace. It is also suitable for consumer goods, electrical/ electronics, energy and healthcare. 

Silplus™ 40 HT

Silplus™ 40 HT is a heat cured silicone elastomer.Benefits:It is easily bendable and has very good heat resistance up to 300°CIt is suitable for press- and injection-molding, calendaring and extrusionProvides excellent resistance for applications exposed to high temperatureTypical Applications:Ideal for aviation, aerospace, high temperature hoses & bellows and mold making for rotocasting.

VITON™ ETP600S

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

VITON™ ETP600S A

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

NANOCYL NC 7000

Multi walled carbon nanotubes recommended for transportation (automotive, aeronautic, boats), electronics (electronic packaging, EMI-shielding, sensors), sports goods and industrial applications (dynamic rubber parts).Benefits:Offers high electrical conductivity and thermal dissipationProvides good processability, UV resistance and black tintingRetention of key mechanical properties Best cost in use ratio and cleanliness Flame retardancy (synergy in combination with other flame retardants)

VULCOFAC® 13PDM MB70

VULCOFAC 13PDM MB70 is a high-performance curing agent and co-agent tailored for peroxide vulcanization of elastomer compounds. It supports critical applications across automotive, electrical, industrial and aerospace sectors. Shelf life: 12 months.Key Benefits:Chemical composition: N, N-Meta-Phenylene Bis MaleimideIt enhances crosslink network strength for improved durabilityIt facilitates clean and precise incorporation into mixes which improves handling and dispersion.It also enhances vulcanization networks for robust mechanical properties.Typical Applications: Suitable for tough, high-performance rubber goods such as construction vehicles tires, heavy-duty belts, O rings and electrical insulations. Other applications include structural adhesives and laminate binders.