Coatings, Inks & Construction

DEUREX® P 3620 M

Micronized polypropylene wax for use in powder, industrial, decorative paints, furniture and parquet coatings. It is suitable for gravure, overprint varnishes, screen printing and flexo printing inks.Benefits:Offers reduced pigment concentration due to high colour intensityProvides improved colour yield due to very fine dispersionDeveloped for water, solvent and UV based systems

DEUREX® P 3820 M

Micronized modified polypropylene wax for use in powder, foil, architectural, industrial and wood coatings. It is applicable in printing inks.Benefits:Offers very good abrasion and scratch resistance Exhibits improved surface properties of paints and coatingsDeveloped for water, solvent and UV based systemsProvides reduction in the friction coefficient

DEUREX® S 3219 M

Micronized silica coated wax recommended for powder, industrial, wood coatings and printing inks.Benefits:Developed for water, solvent and UV based systemsOutstanding resistance against household chemicalsExcellent abrasion and scratch resistanceExhibits excellent transparency

DEUREX® T 3915 M

Micronized Fischer-Tropsch wax applicable in powder, can, industrial and wood coatings. It is also used in gravure, flexo and overprinting inks. Benefits:Developed for water, solved and UV based systemsOffers very good chemical and weather resistanceExhibits excellent abrasion and scratch resistanceImproved UV-resistance and anti-blocking properties

DEUREX® TP 804

Polyolefin wax fully coated with structurant hydrophobic modified silica designed for powder coating applications. It is used as a texturing agent for hybrid systems. It is suitable for printing inks, industrial- and wood coatings. Shelf life: 24 months.Benefits:Provides uniform surface feel and texture at low dosages Easy to disperse in powder coatingsIt increases lubricity by reducing the friction coefficientIt is recoatable without affecting the textureOffers high solvent-, abrasion-, scratch- and excellent temperature resistance

DEUREX® TP 805

Polyolefin wax eco coated with structurant hydrophobic modified silica used in powder coating applications. It is used as a texturing agent for hybrid systems. It is designed for industrial-, wood coatings and printing inks. Shelf life: 24 months.Benefits:Provides uniform surface feel and texture at low dosagesEasy to disperse in powder coatingsOffers high abrasion-, scratch-, solvent and excellent temperature resistanceIt improves lubricity by reducing the friction coefficientIt is recoatable without affecting the texture

RHEOLATE® FX 1100

Thickening agent developed for use in aqueous systems and powdered formulations. It can be used in NO-VOC & low odor systems. It is highly recommended for architectural-, general industrial- and concrete coatings. It is recommended for plaster/stucco, roof coatings, tile adhesive and leather coatings. It is a highly efficient hydrophobic polyether polyurethane. Shelf life: 3 years.Benefits:It enables formulations of odorless paints free of organic solventCompatible with glycols, glycol derivatives and various coalescing agents It improves brushability, higher film build & improved edge covering Improves flow & levelling and appearance

THIXATROL® ST

Rheological additive designed for use in aliphatic and aromatic solvent-borne decorative coatings. It is ideal for air-drying general industrial finishes, anti-fouling paints, asphaltic compositions, caulks, mastics and chlorinated rubber coatings. It is used in epoxies, hammer finishes, high-build finishes, polyurethanes (except systems containing free isocyanates), traffic paints and varnishes. It is highly recommended for marine protective coatings and recommended for inks. It is an organically modified derivative of castor oil. Shelf life: 4 years.Benefits:Imparts flow and leveling control to powder coatingsIncreases viscosity and provides thixotropy Contributes to pigment suspension Provides sag control and controls penetration into porous substrates