Rubber

VITON™ GAL200S

Fluoroelastomer (FKM) developed for injection, transfer and compression molded goods. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Low viscosity, 66% fluorine, peroxide-curedOffers low temperature, water, steam and coolant resistanceProvides fast curing, high elongation both original and agedImproves mold release and mold fouling propertiesDelivers excellent compression set resistance with either low or no post-cureMooney Viscosity (ML 1 + 10, 121 °C) is 25

VITON™ GBL200

Fluoroelastomer (FKM) designed for transfer & injection molding sealing devices, such as O-rings, gaskets and other complex shapes. It is also suitable for extrusion of hoses & tubes and solid Fluoroelastomer (FKM) tubing with good adhesion to non-Fluoroelastomer (FKM) cover layers. It is a B-family copolymer of hexafluoropropylene, vinylidene fluoride, & tetrafluoroethylene plus cure site monomer. Benefits:Exhibits hydrocarbon fluid resistancePossesses resistance to steam, acid, and aggressive engine oilsGeneral purpose & peroxide-curable

VITON™ GBL200S

Fluoroelastomer (FKM) for transfer and compression molding auto lubricating oil and coolant system seals. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low viscosity, 68% fluorine, peroxide-cured, easy processing gradeOffers heat, fluid and low-temperature resistanceProvides exceptionally fast curing, high elongation both original and aged compoundsImproves mold release and mold fouling propertiesExhibits improved mold flow and less shear sensitivityMooney Viscosity (ML 1 + 10, 121 °C) is 25

Viton™ GBL-200S A

Fluoroelastomer suitable for blending with Viton™ GBL-600S A to reach intermediate viscosity ranges for injection molding as well as with other FWRD APA grades (e.g., GF-S A, GLT-S A) It is a terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:It is 68% fluorine, peroxide-cured gradeIt is easily processable by injection molding in standard carbon black and mineral filled formulationsOffers heat, fluid and low temperature resistanceProvides high elongation and storage stabilityShows excellent compression set resistance with short or no post-cure

VITON™ GBL600S

Fluoroelastomer (FKM) developed for compression molding automotive lubricating oil and coolant system seals. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Easy processing, 68% fluorine, peroxide-cured gradeOffers heat, fluid and low temperature resistanceProvides exceptionally fast curing and high elongation Improves mold release and mold fouling propertiesShows excellent compression set resistance with short (2 hr) or no post-cureExhibits improved mold flow, less shear sensitivity Mooney Viscosity, ML 1 + 10 at 121 °C is 65

VITON™ GBL-600S A

Fluoroelastomer suitable for blending with Viton™ GBL-200S A to reach intermediate viscosity ranges for injection molding as well as with other FWRD APA grades (e.g., GF-S A, GLT-S A).Benefits:It is a terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomerIt is 68% fluorine, peroxide-cured gradeExhibits excellent storage stabilityOffers excellent fluid resistance to oils, hot water, steams and acidsProvides excellent physical properties with high elongationManufactured without fluorinated surfactantShows excellent compression set resistance with short or no post-cureEnables high performance in most critical applications as it utilizes the latest advanced polymer architecture (APA) and FWRD technologies from Chemours

VITON™ GF200S

Fluoroelastomer (FKM) designed for injection, transfer and compression molded goods requiring best fluids resistance. It is suitable for blending with Viton™ GF-600S for injection molding. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Low viscosity, 70% fluorine, peroxide-curedOffers heat, fluid and low temperature resistanceImproves mold release and mold fouling propertiesProvides high elongation, both original and aged compoundsExhibits improved water resistance and lower volume swell in waterShows excellent compression set resistance with low or no post-cureMooney Viscosity (ML 1 + 10 at 121 °C) is 25

VITON™ GF-200S A

Fluoroelastomer used in rubber applications. It is suitable for injection molding.Benefits:Provides excellent fluid resistance to aromatic hydrocarbons and alcohols including methanol and ethanol, biodiesel, oils, hot water, steam and acids as wellCompatible with latest EV fluids and most common battery electrolytesExhibits excellent physical properties with high elongationIt contains no or low filler even after agingIt shows outstanding compression set resistance with either low or no post-cureIdeal for blending with Viton™ GF-600S A to reach Intermediate viscosity ranges for injection moldingIt is manufactured without fluorinated surfactant