Münch Chemie International GmbH

Release Agent Rotorelease® RM-1191

Release Agent Rotorelease® RM-1191 is a ready to use release agent.Benefits:Forms a coherent release film on the moldFilm is micro thin and very resistant after cure, even to abrasive materialsIt is temperature stable up to <450°CDevelops a strong chemical bonding to most mold materialsAllows processing like varnishing or gluing without subsequent treatment because it doesn't transfer to the molded partsHelps to reduce build-up caused by depositions of pigments, anti-aging agents and resin residues considerablyTypical Applications:It is suited for rotational molding systems of all plastic types especially polyethylene and polypropylene.

Release Agent MK-268

Release Agent MK-268 is a water-based semi-permanent release agent. It has a shelf life of at least 12 months.Benefits:Provides highly resistant film with strong adhesion to the mold’s surface after water evaporationExhibits prolonged cleaning cycles as well as an improved rubber flowSiicone- and PFAS-freeIt is ready to useTypical Applications:It is used in hot forming of elastomers, especially silicone rubber. It is also suitable for peroxide-cured blends.

Release Agent MK-2414-5

Release Agent MK-2414-5 is a mold release agent used in rubber applications. Shelf life: 12 months.Benefits:It is an aqueous emulsion of synthetic resinsIt is water-based and ready to useVarnishing or gluing is possible without subsequent treatmentReduces the build-up caused by depositions of compound ingredientsProvides an extremely stable and abrasion-resistant film which is temperature stable up to 350°C/662°FTypical Applications:Suitable for processing of rubber compounds with a hardness of 20-95 Shore A and all types of elastomers except silicone rubber.

Release Agent MK-100

Release agent suitable for use in rubber applications.

Screw Clean® SR-47/A

Screw Clean® SR-47/A is a purging compound. It has a shelf life of at least 24 months.Benefits:Offers high cleaning performance with less material usageIt is ready-to use and can be directly used without the addition of carrier polymersDue to miscibility with all polymers, it possesses short cleaning timeIt can also penetrate into undercutsTypical Applications:Developed for cleaning injection molding machinery upon material and color changes. It is suitable for all thermoplastics at a processing temperature of 160-350°C.

Cleaner R-53 á 30 kg

Release agent for use in rubber industry.