Rubber

VAMAC® ULTRA DX

Ethylene methacrylate elastomer for wires & cables, seals, gaskets and extruded hoses. Benefits:Peroxide curable, halogen-freeOffers improved mold release, resistance to mineral oilsPrevents collapse during extrusionMooney Viscosity ML1+4 at 100 °C is 28

Vamac® Ultra EV

Ethylene acrylic elastomer developed for static & dynamic seals or hoses and tubes. It is also recommended for E-mobility and internal combustion engines. Benefits: It was formerly known as VMX3020It is an intermediate Mooney viscosity grade at 23 MU (ML1+4, 100°C)Provides excellent heat resistance, good physical properties  Offers good low temperature flexibility and very good compression set

VAMAC® ULTRA HT

Ethylene methacrylate elastomer for use in turbo charger hoses, torsional dampers and air ducts.Benefits:Halogen-free gradeOffers improved heat-, flex fatigue-, oil- and tear- resistanceProvides better low temperature flexibility, improved mechanical properties, Mooney Viscosity ML1+4 at 100 °C is 29

VAMAC® ULTRA XF

Ethylene methacrylate elastomer for turbo charger hose and other hoses. It is suitable for applications requiring excellent resistance to dynamic flex fatigue.Benefits:Mooney Viscosity ML1+4 at 100 °C is 23 Provides oil resistance properties

HVA™ 2

Crosslinking agent and coagent used in terpolymer of ethylene, propylene, and a diene with the residual unsaturated portion of the diene in the side chain (EPDM). It is also used in copolymers of ethyl or other acrylates and ethylene (AEM), chlorinated rubber (CR), chloro-sulfonyl-polyethylene (CSM), NR and CPE. It is a N,N-m-phenylenedimaleimide-based additive.Benefits:Improves the production efficiency of synthetic rubber productsAllows excellent adhesion to metal inserts and higher hot tensile strengthIt displays improved curing consistency and smoother flow in extrusion processes

VITON™ A

Fluorinated hydrocarbon rubber (FKM). It is a vitan A polymer.

VITON™ A100

Fluoroelastomer (FKM) designed for use with Viton™ Curative No. 50. It is suitable for transfer & injection molding of complex shapes, such as gaskets. It is also used in extrusion, solution coating, fabric and tanks or chemical containers. It is an ultralow-viscosity, A-type gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing and rheology Provides increased mold flow, excellent mold release and good compression set resistance

VITON™ A200

Fluoroelastomer (FKM) designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50. It is suitable for transfer & injection molding of O-rings, valve stem seals & shaft seals and parts with complicated shapes. It is also used in extrusion of fuel hose & tubing and solution coating of fabric and tanks or chemical containers. It is A-family gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing Provides lower viscosity, improved mold flow and excellent extrusion characteristicsOffers better mold release, less mold fouling and improved compression set resistance