Rubber

ARMALEASE KFY 510 is a synergistic emulsion of modified silicones and special lubricants. It also acts as a rubber separator. It has a shelf life of 6 months.Benefits:It is non-reactive and exhibits high chemical stabilityIt is anti-corrosive with high lubricityProtects slider and lubricant for a long time on the last productPossesses excellent heat stabilityThe surface is very resistant to environmental conditionsIt can be applied on wick by dipping or spraying method

SAFIC-GUM CR3300 is a xanthogen or dodecyl mercaptan modified polychloroprene rubber. Shelf life: 1 year.Benefits:Possesses fast crystallization rate and bonding strength at room temperatureTypical Applications:Suitable for use in high strength solution adhesives requiring rapid rates of strength development.

BETAPEG® 4000

Lubricant used in rubber industry such as tire manufacturing. It is a linear polyethylene glycol (PEG) homopolymer.Benefits:Improves filling dispersion during the mixing processIncreases traction resistanceProvides excellent solubility and humectation

BETAPEG® 4000 NF

Lubricant and filler used in rubber industry such as tire manufacturing. It is a linear polyethylene glycol (PEG) homopolymer.Benefits:Increases traction resistanceImproves filling dispersion during the mixing processProvides excellent solubility and humectation

BIRCHSET™ CR

Cure stabilizer, acid scavenger and compression set reduction additive used in EPDM in combination with INNOVOX® calcium oxides. It is suitable for extrusion and continuous pressure less vulcanization methods (e.g., UHF, LCM or hot-air-vulcanization). It consists of an activated polymer. Shelf life: 12 months.Benefits:Gives excellent mixing and dispersion characteristicsFood contact approved Preserves tensile strength and reduces compression setReduces porosity without negative effect

INNOVOX® 95

Desiccant and acid scavenger suitable for EPDM and silicone rubber. It is used in extrusion and continuous pressure less vulcanization methods (e.g., UHF, LCM or hot-air-vulcanization). It is an ultra-fine calcium oxide powder (99.5%) with dispersion aid (0.5%). Shelf life: 12 months.Benefits:Contains a dispersing agent which helps to speed mixing Improves strength and compound curing while binding moisturePrevents blisters and bubbles in the finished productGives excellent mixing and dispersion characteristics  

INNOVOX® 95 F

Desiccant and acid scavenger used in elastomers such as EPDM and silicone. It is suitable for extrusion and continuous pressure less vulcanization methods (e.g., UHF, LCM or hot-air-vulcanization). It is an ultrafine calcium oxide powder (99.5%) with food contact approved dispersion aid (0.5%). Shelf life: 12 months.Benefits:Gives excellent mixing and dispersion characteristicsContains a dispersing agent which helps to speed mixing Improves strength and compound curing while binding moisturePrevents blisters and bubbles in the finished product

INNOVOX® FG

Desiccant and acid scavenger used in elastomers such as EPDM and silicone. It is suitable for extrusion and continuous pressure less vulcanization methods (e.g., UHF, LCM or hot-air-vulcanization). It consists of ultra-fine particles of 100% calcium oxide. Shelf life: 12 months.Benefits:Gives excellent mixing and dispersion characteristicsContains a dispersing agent which helps to speed mixing Improves strength and compound curing while binding moisturePrevents blisters and bubbles in the finished product