Coatings, Inks & Construction

PROTECTOSIL® WS 808

Water-based water-repellent designed for low-fired clay products (floor tiles and terracotta), natural stones, sandstones and gypsum. It is used for waterproofing of mineral substrate like roofing tiles and common brick. It acts as hydrophobizing agent for mineral construction materials and sand. It is also suitable as binder for silicate-based paints. Shelf life: 12 months.Benefits:Offers excellent long-lasting beading effect, high penetration, fast curingProvides water vapor-permeable protection Reduces white deposits and uptake of water & water-soluble saltsHelps to restore natural stone, protects brickwork from dampness

PROTECTOSIL® WS CIT 200

Corrosion inhibitor for steel reinforced concrete structures. It is suitable for building materials which are exposed to high chloride environments such as sea water or de-icing salts (e.g. marine constructions, harbors, parking garages, tunnel or highways). Shelf life: 12 months.Benefits:It is waterborne emulsion which is based on a multifunctional silane systemIt can effectively protect embedded steel reinforcement against chloride induced corrosionReady to use and significantly reduces water uptakeListed under REACH (EU), ENCS (Japan), PICCS (Philippines) and TSCA (USA)

K-POL® 8211

Aliphatic diol recommended for 2K PU coatings. It is also used in general industrial maintenance, floor, wood, automotive OEM and refinish coatings. Shelf life: 12 months.Benefits:Offers chemical, strain and scratch resistanceProvides hard films with good flexibilityLower VOC and good exterior durability 

BAYFERROX® 105 M

Micronized synthetic iron oxide red pigment (PR 101) suitable for automotive-, industrial-, roof tile-, powder- and coil coatings. It is also used in corrosion protection, wood- & plastic coatings, floorings and decorative- & emulsion paints. Benefits: It possesses higher intrinsic hardness and outstanding heat stabilityIt is very resistant to color change during high energy dispersion processesREACH registered 

BAYFERROX® 130 B

Synthetic iron oxide red pigment (PR 101) suitable for concrete masonry blocks, fiber cement, roofing felts and concrete roofing tiles. It is also used in sand-lime bricks, asphalt, paving stones, façade elements and plaster. It contains ferric oxide content (99.2%). Benefits: REACH registered 

BAYFERROX® 130 G

Synthetic iron oxide red pigment suitable for building industry, paving stones, noise barriers, facade elements, screed, concrete roofing tiles, in-situ concrete and concrete masonry blocks.Benefits:Available in microgranules formResistant to color change during high energy dispersion processesIt is dust free and exhibits excellent weather stabilityProvides high tinting strength and light fastness propertyIt is REACH, EINECS, PICCS, TSCA, ENCS, ISHL, DSL, ECL, AICS, IECSC, TCSI, NZIOC registered

BAYFERROX® 1420 M

Micronized synthetic iron hydroxide yellow pigment (PY 42) suitable for automotive-, industrial-, roof tile-, powder- and coil coatings. It is also used in corrosion protection, wood- & plastic coatings, floorings and decorative- & emulsion paints. Benefits:REACH registered Displays excellent dissolver dispersibility

BAYFERROX® 318 G

Synthetic ferrous oxide black pigment suitable for construction material, paving stones, noise barriers, facade elements, screed, concrete roofing tiles, in-situ concrete and concrete masonry blocks.Benefits:It is free-flowing and dust-freeIt is REACH, EINECS, PICCS, TSCA, ENCS, ISHL, DSL, ECL, AICS, IECSC, TCSI and NZIOC registered