Rubber

VITON™ GLT-200S A

VITON™ GLT-200S A is a peroxide cured fluoroelastomer for low temperature applications. It is a terpolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:64% fluorine, low temperature grade with gum polymer viscosityBased on new advanced polymer architecture (APA) and FWRD technologyEnables high performance in the most critical applications without the use of a fluorinated surfactant during productionPossesses excellent physical properties and high elongation, both original and aged in standard compounds and in formulations with no or low filler, even after agingOffers excellent fluid resistance to aromatic hydrocarbons and alcohols, including methanol and ethanol, biodiesel, oils, hot water and steam as well acidsIt is compatible with latest EV fluids and cooling systems Provides excellent color stability and outstanding compression set resistance with either low or no post-cureIt is suitable for blending with Viton™ GF-200S A to reach intermediate viscosity ranges for injection moldingIt allows easy compounding in both hot roll mills and internal mixers

HVA™ 2

Crosslinking agent and coagent used in terpolymer of ethylene, propylene, and a diene with the residual unsaturated portion of the diene in the side chain (EPDM). It is also used in copolymers of ethyl or other acrylates and ethylene (AEM), chlorinated rubber (CR), chloro-sulfonyl-polyethylene (CSM), NR and CPE. It is a N,N-m-phenylenedimaleimide-based additive.Benefits:Improves the production efficiency of synthetic rubber productsAllows excellent adhesion to metal inserts and higher hot tensile strengthIt displays improved curing consistency and smoother flow in extrusion processes

VITON™ A

Fluorinated hydrocarbon rubber (FKM). It is a vitan A polymer.

VITON™ A100

Fluoroelastomer (FKM) designed for use with Viton™ Curative No. 50. It is suitable for transfer & injection molding of complex shapes, such as gaskets. It is also used in extrusion, solution coating, fabric and tanks or chemical containers. It is an ultralow-viscosity, A-type gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing and rheology Provides increased mold flow, excellent mold release and good compression set resistance

VITON™ A200

Fluoroelastomer (FKM) designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50. It is suitable for transfer & injection molding of O-rings, valve stem seals & shaft seals and parts with complicated shapes. It is also used in extrusion of fuel hose & tubing and solution coating of fabric and tanks or chemical containers. It is A-family gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing Provides lower viscosity, improved mold flow and excellent extrusion characteristicsOffers better mold release, less mold fouling and improved compression set resistance

VITON™ A201C

Fluoroelastomer (FKM) suitable for transfer & injection molding of O-rings, gaskets, seals, and other complex shapes. It is also used for extrusion of hose- & solid Fluoroelastomer (FKM) tubing and O-ring cord. It is an incorporated cure A-family dipolymer of hexafluoropropylene and vinylidene fluoride plus cure chemicals.Benefits:Possesses chemical and heat resistance characteristics Offers significant improvements in processing and rheologyProvides fully precompounded O-ring curative level, improved mold flow and easier mold releaseDisplays less mold fouling, low viscosity, ultrafast cure rate, excellent scorch safety and excellent compression set resistance

VITON™ A202C

Fluorinated hydrocarbon rubber (FKM). It is a vitan A precompound.

VITON™ A331C

Fluoroelastomer (FKM) designed for injection, transfer, & compression molding of O-rings, seals, and gaskets. It is also used in other profiles requiring improved demolding hot tear resistance and extruded O-ring cord, hose & other profiles. It is an incorporated cure A-family dipolymer of hexafluoropropylene and vinylidene fluoride plus cure chemicals.Benefits:Possesses intermediate viscosity level and reduced curative levelOffers improved processing, increased mold flow, better mold release with less mold fouling and good compression set resistance