Rubber

VULCOFAC® 828 DL60

Epoxy resin used in electrical and electronic industries for potting, casting & impregnating. It is also used in building and civil engineering industries for floorings, adhesives, mortars & grouts. Suitable in filament winding for composites. It is composed of 60% liquid epoxy resin blend with 40% silicon dioxide. Shelf life: 12 months.Benefits:Dry blend, produced from bisphenol A resin and epichlorohydrinContains no diluentProvides good pigment-wetting and good resistance to filler settlingOffers a high level of mechanical and chemical resistance properties in cured state

VULCOFAC® 828 DL70

Epoxy resin used in electrical and electronic industries for potting, casting & impregnating. It is also used in building and civil engineering industries for floorings, adhesives, mortars & grouts. Suitable in filament winding for composites. Used in CSM formulations to replace the lead oxide system. It is composed of 70% liquid epoxy resin blend with 30% silicon dioxide. Shelf life: 12 months.Benefits:Dry blend, produced from bisphenol A resin and epichlorohydrinContains no diluentProvides good pigment-wetting and good resistance to filler settlingOffers a high level of mechanical and chemical resistance properties in cured state

VULCOFAC DTDM MB80

Sulfur donor designed for natural and synthetic elastomers. It is applicable in conveyor belts, hoses, trucks and aircraft tires. It is suitable for general industrial products produced by high-temperature extrusion and injection molding. It is used in both EV and semi-EV curing systems as a partial or total replacement of free sulfur.  Shelf life: 12 months.Benefits:It is composed of 80% 4,4’-dithiodimorpholine in a polymer binder system

VULCOFAC® RESORCINOL MB80

Adhesion promoter designed for rubber to metal and rubber to textile bonding. It finds application in tires and conveyor belts and used in conjunction with a methylene donor. Shelf life: 24 months.Benefits: 99.6 to 100% pureIt is composed of 80% resorcinol in a polymer (EP) binder system

VULCOFAC® RESORCINOL MB80SBR

Adhesion promoter designed for rubber to metal bonding. It is used in conjunction with a methylene donor and finds application in tires and conveyor belts. Shelf life: 24 months.Benefits:99.6 to 100% pure It is composed of 80% resorcinol in a polymer binder system

VULCOFAC® TAIC

VULCOFAC TAIC is a crosslinking coagent recommended for peroxide cure of elastomers and electron beam crosslinking of polymers. It also acts as a curing agent for fluoro-polymers and Hydrogenated Nitrile Butadiene Rubber (HNBR). Shelf life: 12 months.Key Benefits:Chemical Composition: Triallyl isocyanurate (TAIC)Accelerates cure rates and strengthens batch-to-batch consistency in peroxide-based formulationsIt is suitable for fluoroelastomer (FKM)Provides improved heat resistance and mechanical strengthOffers better aging resistance & exhibits low compression setHelps to increase crosslinking densityTypical Applications:Applicable for rubber seals, gaskets, industrial hoses & belts, wire and cable insulation, delivering superior cross-linking and enhanced end-use properties.

ALCANPLAST 188

ALCANPLAST™ 188 is Di (Butyl diglycol) Adipate. It is a high-performance monomeric plasticizer.It is used in NBR rubbers even with high nitrile content (NBR, NBR/PVC). Also used with polar elastomers (CR, ACM, ECO), and with other polymers such as cellulosic (except cellulose acetate) and vinyl. Recommended   for   technical   parts   used   in   wide   temperature aging performances.FDA Approved 177.2600

VULCOFAC® 633 MB75

Curing agent recommended for timing belts, V belts, rubber rolls, and other elastomers. It is suitable for processing at high temperature. Shelf life: 6 months.Benefits:Provides scorch safety, low blooming, high tensile strengthOffers low load bearing strength, low compression set properties  Imparts excellent adhesion of rubber to metal