Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

  • Sealants, seals & gaskets
  • Reset filters
122 results found

Sort by

Fluorinated hydrocarbon rubber (FKM) grade used principally in molded O-rings, packings and shaft seals. Suitable for tubing, roll covers, coatings and other calendered goods.Benefits:It is the polymer of choice for maximum compression set resistance and tensile strength Offers good balance of heat and fluid resistanceIt also performs well for extrusion, elongation and mold flow Mooney Viscosity, ML 1 + 10 at 100 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression & transfer molding of seals, gaskets, diaphragms and O-rings.Benefits:Provides excellent fluids and permeation resistance to today’s automotive fuelsOffers heat & chemical resistance and excellent compression set resistanceDisplays improved processing, rheology & physical properties, mold release and extrusion performanceShows increased mold flow and less mold fouling 

Fluoroelastomer (FKM) designed for transfer & injection molding sealing devices, such as O-rings, gaskets and other complex shapes. It is also suitable for extrusion of hoses & tubes and solid Fluoroelastomer (FKM) tubing with good adhesion to non-Fluoroelastomer (FKM) cover layers. It is a B-family copolymer of hexafluoropropylene, vinylidene fluoride, & tetrafluoroethylene plus cure site monomer. Benefits:Exhibits hydrocarbon fluid resistancePossesses resistance to steam, acid, and aggressive engine oilsGeneral purpose & peroxide-curable

Polybutadiene adducted with maleic anhydride  for use in rubber compounds, elastomers, electronics, encapsulants, sealants and compatibilizers.Benefits:Promotes adhesion in rubbersOffers moisture resistanceShows compatibility with polar and non-polar materials 

Polybutadiene adducted with maleic anhydride  for use in rubber compounds, elastomers, electronics, encapsulants, sealants and compatibilizers.Benefits:Promotes adhesion in rubbersOffers moisture resistanceShows compatibility with polar and non-polar materials 

Polymeric type II coagent and non-extractable plasticizer designed for wire, cables, coatings, electronics and rubber applications. It is suitable for electrical insulator, encapsulants, sealants and thermoplastic modification. This low molecular weight, high vinyl homopolymer of butadiene resin is used in peroxide, sulfur-cured elastomers and thermoplastic resins. It is a processing aid and used in olefinic-based elastomers, saturated and unsaturated elastomers for curing.Benefits:Offers high reactivity, excellent hydrophobicity and dielectric propertiesExhibits low temperature flexibility, abrasion resistance, reduces blooming effectsDelivers good hardness, scorch protection, good compression setProvides excellent crosslink densities, high tear strength

Let’s build your next solution together

Get Support

Let’s build your next solution together

Guiding you through every stage of your innovation journey.

Contact-us