Chemours

VITON™ A100

Fluoroelastomer (FKM) designed for use with Viton™ Curative No. 50. It is suitable for transfer & injection molding of complex shapes, such as gaskets. It is also used in extrusion, solution coating, fabric and tanks or chemical containers. It is an ultralow-viscosity, A-type gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing and rheology Provides increased mold flow, excellent mold release and good compression set resistance

HVA™ 2

Crosslinking agent and coagent used in terpolymer of ethylene, propylene, and a diene with the residual unsaturated portion of the diene in the side chain (EPDM). It is also used in copolymers of ethyl or other acrylates and ethylene (AEM), chlorinated rubber (CR), chloro-sulfonyl-polyethylene (CSM), NR and CPE. It is a N,N-m-phenylenedimaleimide-based additive.Benefits:Improves the production efficiency of synthetic rubber productsAllows excellent adhesion to metal inserts and higher hot tensile strengthIt displays improved curing consistency and smoother flow in extrusion processes

VITON™ A361C

Fluoroelastomer (FKM) designed for compression, transfer & injection molding of O-rings & gaskets, valve stem and crankshaft seals. It is an incorporated cure A-family dipolymer of hexafluoropropylene and vinylidene fluoride plus cure chemicals and metal adhesion promoter. Benefits:Offers better metal adhesion along with the fluid and heat resistance characteristicsPossesses intermediate viscosity level and reduced curative levelOffers improved processing, increased mold flow and easier mold release with less mold foulingDisplays improved demolding hot tear and good metal bonding with standard industrial primers

VITON™ FREEFLOW™ FF40

Processing additive designed for polyolefins resins such as LLDPE, LDPE and HDPE. Shelf life: 4 years.Benefits:Eliminates melt fracture and reduces die buildupDecreases die pressure, power requirements and temperatureHelps to increase outputShows improved properties even with narrow diesMost thermally stable

VITON™ A200

Fluoroelastomer (FKM) designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50. It is suitable for transfer & injection molding of O-rings, valve stem seals & shaft seals and parts with complicated shapes. It is also used in extrusion of fuel hose & tubing and solution coating of fabric and tanks or chemical containers. It is A-family gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing Provides lower viscosity, improved mold flow and excellent extrusion characteristicsOffers better mold release, less mold fouling and improved compression set resistance

VITON™ B50

Fluorinated hydrocarbon rubber (FKM). It is a vitan B polymer.