Rubber

VULCOFAC® 828 DL70

Epoxy resin used in electrical and electronic industries for potting, casting & impregnating. It is also used in building and civil engineering industries for floorings, adhesives, mortars & grouts. Suitable in filament winding for composites. Used in CSM formulations to replace the lead oxide system. It is composed of 70% liquid epoxy resin blend with 30% silicon dioxide. Shelf life: 12 months.Benefits:Dry blend, produced from bisphenol A resin and epichlorohydrinContains no diluentProvides good pigment-wetting and good resistance to filler settlingOffers a high level of mechanical and chemical resistance properties in cured state

VULCOFAC® RESORCINOL MB80

Adhesion promoter designed for rubber to metal and rubber to textile bonding. It finds application in tires and conveyor belts and used in conjunction with a methylene donor. Shelf life: 24 months.Benefits: 99.6 to 100% pureIt is composed of 80% resorcinol in a polymer (EP) binder system

VULCOFAC® RESORCINOL MB80SBR

Adhesion promoter designed for rubber to metal bonding. It is used in conjunction with a methylene donor and finds application in tires and conveyor belts. Shelf life: 24 months.Benefits:99.6 to 100% pure It is composed of 80% resorcinol in a polymer binder system

VULCOFAC® TAIC

VULCOFAC TAIC is a crosslinking coagent recommended for peroxide cure of elastomers and electron beam crosslinking of polymers. It also acts as a curing agent for fluoro-polymers and Hydrogenated Nitrile Butadiene Rubber (HNBR). Shelf life: 12 months.Key Benefits:Chemical Composition: Triallyl isocyanurate (TAIC)Accelerates cure rates and strengthens batch-to-batch consistency in peroxide-based formulationsIt is suitable for fluoroelastomer (FKM)Provides improved heat resistance and mechanical strengthOffers better aging resistance & exhibits low compression setHelps to increase crosslinking densityTypical Applications:Applicable for rubber seals, gaskets, industrial hoses & belts, wire and cable insulation, delivering superior cross-linking and enhanced end-use properties.

ALCANPLAST 188

ALCANPLAST™ 188 is Di (Butyl diglycol) Adipate. It is a high-performance monomeric plasticizer.It is used in NBR rubbers even with high nitrile content (NBR, NBR/PVC). Also used with polar elastomers (CR, ACM, ECO), and with other polymers such as cellulosic (except cellulose acetate) and vinyl. Recommended   for   technical   parts   used   in   wide   temperature aging performances.FDA Approved 177.2600

VULCOFAC® 633 MB75

Curing agent recommended for timing belts, V belts, rubber rolls, and other elastomers. It is suitable for processing at high temperature. Shelf life: 6 months.Benefits:Provides scorch safety, low blooming, high tensile strengthOffers low load bearing strength, low compression set properties  Imparts excellent adhesion of rubber to metal

NAUGARD™ Q DROP

Amine antioxidant used in natural rubber, synthetic polyisoprene, SBR, BR, NBR and EPDM. Suitable for tire carcasses, retreads, apex, belts and hose. It can be used for seals, mechanical goods, footwear and wire. Benefits: Gives good protection against degradation due to heat and oxygen It can be used with peroxide curing systems Tends to decrease processing safety and activates cures in neoprene

SP 1045 H

Crosslinker designed for processing, curing of butyl rubber, coatings and sealants. It is applicable in tire curing bags, conveyor belts, gaskets and heat-resistant packings. It is heat-reactive alkylphenolic resin.Benefits:Compatible with nitrile, natural and polychloroprene rubbersOffers high modulus, tightly cross-linked structureProvides ozone, dry and heat resistanceNon-blooming and non-stainingDelivers good heat, chemical and abrasion resistance in coatings