Coatings, Inks & Construction

Michem® Prime 4983R is an adhesion promoter suitable for coating applications. It is used as tie coat and primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent and heat sealable coating. It is serve as nonwoven binder and thermally active binder in thermal transfer release coatings. Shelf life: 24 months.Benefits:Offers outstanding adhesion to metallic and cellulosic substratesProvides water, grease, oil and solvent resistanceExhibits excellent clarity, adhesion, lower heat seal temperature, durability, and crosslinkability

NATURESHIELD® 90 is a scratch and abrasion resistance agent suitable for coating applications.Benefits:Improves the durability, weatherability, and aesthetics of wood and stone-based substratesProvides water and abrasion resistance and can be an alternative to standard polyolefin wax emulsionsImparts good water beading, and enhance the natural pattern of woodIt may be applied by spray, brush, roll, rod, gravure and flexoCertified under the USDA BioPreferred ProgramTypical Applications:Recommended for wood and concrete surface coatings.

NATURESHIELD® 61 is a scratch and abrasion resistance agent used for coating applications.Benefits:Provides water-, oil-, abrasion- and grease resistance (level is dependent on substrate)Improves the durability, weatherability, and aesthetics of wood and stone-based substratesImparts good water beading, and enhance the natural pattern of woodIt may be applied by spray, brush, roll, rod, gravure and flexoBio-based and compostable with direct Food Contact complianceCertified under the USDA BioPreferred ProgramTypical Applications:Suitable for wood and concrete surface coatings.

TEGO® FLOW 404

TEGO® FLOW 404 is a universal siloxane-based flow and anti-crater additive. It has a shelf life of 36 months.KEY BENEFITSOffers efficient and broadly usable minimal impaction slip effectIt is highly compatibleIdeal for clear and pigmented systems 100 %solidIt shows anti-blocking-, anti-crater effect and flow promotionIt is a low-foam gradeSoluble in water, ethanol, TPGDA, acetone, butyl acetate and mineral spiritsTypical Applications:Used in water-, solvent borne, 2-pack 100% radiation-curing pigmented-, clear- and general industrial coating applications. Recommended for floor-, wood-, parquet- furniture coatings. It is also used in architectural paints.

FB 250 BX50

FB-250BX 50 is an etherified unplasticized phenolic resin. It has a shelf life of 6 months.Key Benefits:It can be combined with polyvinyl butyral for one and two pack wash primersPigments can be dispersed in FB-250BX 50, using xylene/n-butanol and isopropanol as solvents in the mill base.It shows high levels of hardness, adhesion, salt spray resistance and water dispersibilityTypical Applications:Zinc tetra oxy chromate, zinc chromate and zinc phosphate can be used as anti-corrosive pigments. It is used in car repair, wash primer, fillers, general industry, maintenance primer for aircraft, machinery and steel structure.

SFC 138 B

SFC 138 B is a binder used in coating applications. It is an ortho-cresol based, BPA-free co-binder. Shelf life: 1 year.Benefits:It is gold color for tinting, curable phenolic resin in solutionProvides good flexibility, adhesion and chemical resistanceTypical Applications:Designed for epoxy and polyester can and coil coatings.

SFC 112 65

SFC 112 65 is a butyl-phenol based, BPA-free co-binder. It has a shelf life of 1 year. Key Benefits:It is a curable phenolic resin in solution Offers excellent flexibility and adhesion Provides lighter color, non-tinting and excellent color stability Typical Applications: It is used in combination with PES binder for BPA - NI systems. It is suitable for epoxy and polyester can- and coil coatings.

FB 210 B 60

FB 210 B60 is a BPA based co-binder.  It is a curable phenolic resin in solution.Key Benefits:Provides excellent flexibility and excellent adhesionOffers excellent chemical resistancePossesses light color and non-tinting propertiesTypical Applications:It is used for epoxy can- and coil coatings.