Plastics Additives

MIKROFINE® OBSH MB80

Blowing agent used for natural and synthetic sponge rubber polymer. It is composed of 80% OBSH in polymeric binder, EPDM.Benefits: Displays excellent dispersion and high effectivenessTack-free, dust-free and shows wider compatibility with other elastomers

MIKROFINE® OBSH MB 80 EPDM

Blowing agent developed for natural and synthetic sponge rubber polymer. It is a masterbatch of 80% OBSH in polymeric binder, EPDM.

MIKROFINE® OBSH R

Chemical blowing agent used in natural & synthetic sponge rubber, cellular plastics like EVA copolymers, LDPE and PVC. Suitable for cellular cable insulation, shoe midsoles, PVC-NBR floats and athletic padding.Benefits:Used in extruded closed cell profiles for automotive door seals, low density refrigeration and air conditioning insulationOdorless, non-staining and non-discoloringControls sink marks during injection molding of structural foam

MIKROFINE® ZBS

Activator for chemical blowing agent for use in azodicarbonamide. It is composed of zinc (benzene sulfinate) dihydrate. Benefits: Aids in foamed articles production at lower temperature

Armostat® 300-XE75

Anti-static additive suitable for high-density polyethylene (HDPE). It is composed of 75% concentration of Armostat® 300 on a high-density polyethylene (HDPE) carrier. Benefits: It is semi-permanent and is derived from animalsListed in TSCA    

PERKADOX® 14-40B-GR-DD-S

Bifunctional organic peroxide suitable for the crosslinking of polyolefins. Benefits:Typical crosslinking temperature: 175°C (rheometer t90 about 12 min.)Listed on TSCA inventory

PERKADOX® 14-40B-GR-S

Crosslinking agent developed for use in polyolefins. It is a bifunctional peroxide and supplied as 40% formulation on an inert carrier system in granular form.Benefits:Listed on TSCA inventoryTypical crosslinking temperature: 175°C (rheometer t90 about 12 min.)

PERKADOX® 14-40B-PD-S

Crosslinking agent designed for use in polyolefins. It is a bifunctional peroxide and supplied as 40% formulation on an inert carrier system in powder form.Benefits:Listed on TSCA inventoryTypical crosslinking temperature: 175°C (rheometer t90 about 12 min.)