Rubber

VULCOFAC® TAC DL70

Crosslinking coagent designed for sealings, damping materials,  pipes & hoses, electronic components and shoe soles. Also used in electron beam crosslinking of TPE's. Shelf life: 12 months.Benefits:Improves aging propertiesIncreases the crosslinking densityLeads to a lower compression set

VULCOFAC® TAIC

VULCOFAC TAIC is a crosslinking coagent recommended for peroxide cure of elastomers and electron beam crosslinking of polymers. It also acts as a curing agent for fluoro-polymers and Hydrogenated Nitrile Butadiene Rubber (HNBR). Shelf life: 12 months.Key Benefits:Chemical Composition: Triallyl isocyanurate (TAIC)Accelerates cure rates and strengthens batch-to-batch consistency in peroxide-based formulationsIt is suitable for fluoroelastomer (FKM)Provides improved heat resistance and mechanical strengthOffers better aging resistance & exhibits low compression setHelps to increase crosslinking densityTypical Applications:Applicable for rubber seals, gaskets, industrial hoses & belts, wire and cable insulation, delivering superior cross-linking and enhanced end-use properties.

VULCOFAC® TMPTMA DL70

VULCOFAC TMPTMA DL70 is an advanced crosslinking co‑agent specifically designed to support peroxide vulcanization of elastomers like EPDM (ethylene–propylene–diene monomer), NBR (nitrile butadiene rubber) and CSM (chlorosulfonated polyethylene rubber).Key Benefits: Chemical composition: Trimethylolpropane trimethacrylate (TMPTMA, also known as SR‑350)Enhances crosslink density, cure control and overall network formation in peroxide vulcanizationTri-functional methacrylate structure delivers strong, dense, and durable crosslinksCompatible across multiple elastomer systems engineered for peroxide cureOffers improved performance in sealed and molded componentsTypical Applications:Ideal for seals, gaskets, hoses and molded parts in automotive, industrial and specialty rubber sectors where durability, chemical resistance and heat resistance are critical.

NAUGARD™ Q DROP

Amine antioxidant used in natural rubber, synthetic polyisoprene, SBR, BR, NBR and EPDM. Suitable for tire carcasses, retreads, apex, belts and hose. It can be used for seals, mechanical goods, footwear and wire. Benefits: Gives good protection against degradation due to heat and oxygen It can be used with peroxide curing systems Tends to decrease processing safety and activates cures in neoprene

MILLATHANE® 26

Polyether millable urethane designed for rubber parts in contact with wet and dry food such as hose, gaskets, rollers and belting. Also used in non-food handling applications, including rollers.Benefits:Compliant with FDA regulation 21CFR 177.2600Offers excellent strength properties and good compression setGives excellent hydrolysis and abrasion resistanceShows good heat and oil resistance

MILLATHANE® 26M

Polyether millable urethane for rubber parts in contact with dry and wet food such as gaskets, hose, belting and rollers. Also suitable for non-food handling applications such as rollers.Benefits:Provides excellent strength properties and good compression setShows good heat and oil resistanceCompliant with FDA regulation 21CFR 177.2600Gives excellent hydrolysis and abrasion resistance

MILLATHANE® UV

UV curable millable polyurethane for tubing, hose covers, cable jackets, tapes and sheeting. Suitable for molded parts, rubber-covered rollers and fabrics. Also used in low or room temperature cures.Benefits:Provides super-fast cure times with increased productivityIt is abrasion-resistant and reduces energy costsLeads to less shrinkage due to lower curing temperatures

THANECURE® T9 LG

Vulcanizing agent for millable polyurethane rubbers such as industrial molded parts, rollers and ceramic tile molds. Also used as a crosslinker for elastomer systems. Acts as an adhesion promoter for tire cord, conveyor belts, drive belts, hose and coated fabrics.Benefits:Polyfunctional isocyanate, a dimer of 2,4-toluene diisocyanate (TDI)It appears as a fine white powder