Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

    424 results found

    Sort by

    Fluorinated hydrocarbon rubber (FKM) grade for maximum compression set resistant applications.

    Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

    Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

    Fluorinated hydrocarbon rubber (FKM) grade designed for compression & transfer molding of seals, gaskets, diaphragms and O-rings.Benefits:Provides excellent fluids and permeation resistance to today’s automotive fuelsOffers heat & chemical resistance and excellent compression set resistanceDisplays improved processing, rheology & physical properties, mold release and extrusion performanceShows increased mold flow and less mold fouling 

    Fluoroelastomer (FKM) developed for injection, transfer and compression molded goods. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Low viscosity, 66% fluorine, peroxide-curedOffers low temperature, water, steam and coolant resistanceProvides fast curing, high elongation both original and agedImproves mold release and mold fouling propertiesDelivers excellent compression set resistance with either low or no post-cureMooney Viscosity (ML 1 + 10, 121 °C) is 25

    Fluoroelastomer (FKM) designed for transfer & injection molding sealing devices, such as O-rings, gaskets and other complex shapes. It is also suitable for extrusion of hoses & tubes and solid Fluoroelastomer (FKM) tubing with good adhesion to non-Fluoroelastomer (FKM) cover layers. It is a B-family copolymer of hexafluoropropylene, vinylidene fluoride, & tetrafluoroethylene plus cure site monomer. Benefits:Exhibits hydrocarbon fluid resistancePossesses resistance to steam, acid, and aggressive engine oilsGeneral purpose & peroxide-curable

    Fluoroelastomer (FKM) for transfer and compression molding auto lubricating oil and coolant system seals. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low viscosity, 68% fluorine, peroxide-cured, easy processing gradeOffers heat, fluid and low-temperature resistanceProvides exceptionally fast curing, high elongation both original and aged compoundsImproves mold release and mold fouling propertiesExhibits improved mold flow and less shear sensitivityMooney Viscosity (ML 1 + 10, 121 °C) is 25

    Fluoroelastomer suitable for blending with Viton™ GBL-600S A to reach intermediate viscosity ranges for injection molding as well as with other FWRD APA grades (e.g., GF-S A, GLT-S A) It is a terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:It is 68% fluorine, peroxide-cured gradeIt is easily processable by injection molding in standard carbon black and mineral filled formulationsOffers heat, fluid and low temperature resistanceProvides high elongation and storage stabilityShows excellent compression set resistance with short or no post-cure

    Let’s build your next solution together

    Get Support

    Let’s build your next solution together

    Guiding you through every stage of your innovation journey.

    Contact-us