Coatings, Inks & Construction

Specialty ingredients enabling durability, protection and performance. Designed for coatings, inks and construction materials.

Coatings, Inks & Construction

Category

Sub-category

Manufacturer

Brand name

Physical form

Color

  • Coating system
  • Reset filters
800 results found

Sort by

Rheological additive ideal for waterborne & cementitious systems and latex paints. It is also used in electro-deposition paints, plaster compounds, water-reducible systems and foundry resins/foundry paints (washes). It is based on a purified hectorite clay. Shelf life: 4 years.Benefits:It imparts thixotropy and good anti-settling properties It provides thermostable aqueous phase viscosity controlPrevents hard settlement of pigments/fillers and minimizes floating/flooding of pigmentsEnhances texturing and stippling effect

Rheological additive suitable for aerosol- & anti-corrosive paints, automotive finishes and primers. It is also used in interior- & exterior architectural paints, wood stains, refinish systems, plastisols and organosols. It is highly recommended for solvent-borne can-, car OEM-, coil-, marine protective-, plastic- & leather coatings and inks. It is a pre-activated hectorite based organoclay in castor oil. Shelf life: 2 years.Benefits:It gives higher efficiency than powdered organoclays, ensuring more consistent finished productsNo dust and ready to use ˙It contributes to process optimization & reduces production time

Rheological additive suitable for aerosol- & anti-corrosive paints, primers and automotive finishes. It is also used in interior & exterior architectural paints, plastisols, organosols, refinish systems and wood stains. It is highly recommended for solvent-borne can-, car OEM-, coil-, marine protective coatings and inks. It is recommended for paper coatings. It is a pre-activated hectorite based organoclay in odorless mineral spirits. Shelf life: 2 years.Benefits:It provides viscosity consistencyNo dust and ready to use Contributes to process optimization & easily dispersible formulas, reducing production time 

Rheological additive suitable for non-polar to medium-polarity aliphatic and other solvent systems. It is used in anti-corrosive paints, bituminous coatings, decorative long-oil alkyd-, do-it-yourself paints, printing inks, primers, fillers, undercoats, traffic paints and wood stains. It is highly recommended for can-, car OEM-, car refinish-, coil-, general industrial-, marine protective-, plastic- & roof coatings. It is an organic derivative of a bentonite clay. Shelf life: 4 years.Benefits:It provides stable viscosity buildIt reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillersCost-effective Disperses very easily, even under low shear conditions

Rheological additive suitable for moderate to high polarity organic media containing solvents such a ketones, esters, glycol ethers and alcohols. It is used in anti-corrosion paints, automotive finishes/primers, epoxy systems, foundry paints, gravure printing inks, industrial finishes and inorganic zinc-rich coatings. It is ideal for maintenance coatings, NC lacquers/inks, paint removers, polyester repair putties, PU two-pack systems and vinyl paints (high-build). It is highly recommended for can-, coil-, car OEM-, marine protective-, plastic- and wood coatings. It is an organic derivative of a bentonite clay. Shelf life: 4 years.Benefits:Cost-effective replacement for conventional organoclay additives Disperses very easily, even under low shear conditions It provides stable viscosity buildIt controls sag and pigment settling 

Highly efficient rheological additive suitable for non-polar to medium-polarity media. It is used in acid-curing systems, acrylic paints, alkyd systems, anti-corrosion maintenance paints, automotive finishes/primers, bituminous coatings and chlorinated rubber paints. It is ideal for decorative coatings, epoxy systems, gravure printing inks, hammer finishes, industrial finishes, marine- & oil paints, polyester paints & fillers, primers, PU two-pack systems and vinyl paints (high-build). It is highly recommended for solvent-borne can coatings and recommended for car OEM-, coil-, marine protective-, plastic- and wood coatings. It is an organic derivative of a hectorite clay. Shelf life: 4 years.Benefits:Cost-effective alternative to other organoclay rheological additives and fumed silicaDisperses readily when added directly at the pigment-grinding stageIt offers improved batch-to-batch consistency

Rheological additive suitable for waterborne decorative latex paints and gypsum plasters. It is also used in building materials such as mortars & renderings based on lime, cement and gypsum. It is recommended for water-reducible coatings and highly recommended for architectural- & concrete coating, grouts, plaster/stucco and tile adhesives. It is a beneficiated, high purity smectite clay. Shelf life: 4 years.Benefits:It prevents settling of pigments and fillers Provides low- and mid-shear viscosity It enhances sag and slump resistanceIt offers improved workability and compatibility with other thickeners

Anti-sagging agent and effective auxiliary used in non-aqueous coatings, dipping varnishes, and aromatic-free formulations. It is ideal for air-dried alkyd, wash primers, high-solid paints, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is highly recommended for solvent-borne car refinish, general industrial primers, plastic & wood coatings and asphalt emulsion. It is sulphonated castor wax. Shelf life: 3 years.Benefits:It fights settling and saggingIt gives a thixotropic character to coatings, even if the product is post addedImproves the brushability and has a positive influence on the wetting and dispersing of the pigmentReduces sedimentation

Let’s build your next solution together

Get Support

Let’s build your next solution together

Guiding you through every stage of your innovation journey.

Contact-us