Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

  • Pipes, Hoses & Fittings
  • Reset filters
53 results found

Sort by

Fluoroelastomer (FKM) designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50. It is suitable for transfer & injection molding of O-rings, valve stem seals & shaft seals and parts with complicated shapes. It is also used in extrusion of fuel hose & tubing and solution coating of fabric and tanks or chemical containers. It is A-family gum dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits:Demonstrates improved processing Provides lower viscosity, improved mold flow and excellent extrusion characteristicsOffers better mold release, less mold fouling and improved compression set resistance

Fluoroelastomer (FKM) designed for injection, transfer, & compression molding of O-rings, seals, and gaskets. It is also used in other profiles requiring improved demolding hot tear resistance and extruded O-ring cord, hose & other profiles. It is an incorporated cure A-family dipolymer of hexafluoropropylene and vinylidene fluoride plus cure chemicals.Benefits:Possesses intermediate viscosity level and reduced curative levelOffers improved processing, increased mold flow, better mold release with less mold fouling and good compression set resistance

Fluoroelastomer (FKM) designed to be cured with either Viton™ Curative No. 30 or Viton™ Curative No. 50. It is used for transfer- & injection molding of complex shapes, extrusions (e.g., fuel hose and tubing) and solution coatings of fabrics, tanks, or chemical containers. It is a low viscosity, B-type gum terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene.Benefits:Demonstrates improved processing and rheology Provides increased mold flow and excellent mold release

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluoroelastomer (FKM) designed for transfer & injection molding sealing devices, such as O-rings, gaskets and other complex shapes. It is also suitable for extrusion of hoses & tubes and solid Fluoroelastomer (FKM) tubing with good adhesion to non-Fluoroelastomer (FKM) cover layers. It is a B-family copolymer of hexafluoropropylene, vinylidene fluoride, & tetrafluoroethylene plus cure site monomer. Benefits:Exhibits hydrocarbon fluid resistancePossesses resistance to steam, acid, and aggressive engine oilsGeneral purpose & peroxide-curable

Fluoroelastomer (FKM) recommended for low permeation fuel and filler neck hose for automotive and small engines.Benefits:Offers high quality and smooth extrudate surfaceProvides excellent green strength and fuel permeation resistanceExhibits good tensile strength and adhesion to other elastomers in multilayer hoses

Fluoroelastomer (FKM) designed for automotive and small engine applications utilizing low permeation fuel and filler neck hose and tubing.Benefits:Provides lower viscosity, lower hardness and better compressionExhibits high quality and smooth extrudate surfaceShows good adhesion, fuel permeation resistance and physical propertiesOffers excellent green strength that helps to maintain extrudate shape

Let’s build your next solution together

Get Support

Let’s build your next solution together

Guiding you through every stage of your innovation journey.

Contact-us