Coatings, Inks & Construction

TEGO® PROTECT 5100 N

Hydroxyl functional suitable for water-based architectural paints, protective, general industrial and leather coatings. Shelf life: 24 months.Benefits:Additive for easy-to-clean effectStain-resistant with additional release effect

TEGO® THERM L-300

Silicone polyester resin suitable for water-based coatings. It is used in matrix for insulation particles (TIC), insulation- and heat-stable coatings. Shelf life: 12 months.Benefits:Low VOC contentProvides excellent adhesion, heat stability Offers high filler loadingExhibits broad compatibility with acrylic emulsions

WALSRODER™ NCA CHIPS 400 ATBC 20%

Nitrocellulose resin developed for flexo and rotogravure printing inks. It is suitable for buffing finishes in wood coatings. It contains 20 % ATBC as plasticizer. It is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, alcohol-freeAllows to modify viscosity and rheology Exhibits rapid solvent evaporation with low solvent retentionProvides transparent hard but flexible fast-drying films and excellent binding propertiesSoluble in ethanol, esters and ketonesShows excellent compatibility with most organic solvents, pigments and resins

WALSRODER™ NC CHIPS A400 ATBC 20 %

Nitrocellulose resin developed for coatings and inks. It is suitable for buffing finishes in wood coatings. It is used in flexo and rotogravure printing inks. It contains 20 % ATBC as plasticizer. This cellulose ester is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, alcohol-freeAllows viscosity and rheology modificationExhibits rapid solvent evaporation with low solvent retentionProvides transparent hard but flexible fast-drying films, excellent binding propertySoluble in ethanol, esters and ketonesShows excellent compatibility with most organic solvents, pigments and resins

WALSRODER™ NC CHIPS E330 ESO 20%

Nitrocellulose resin suitable for sanding-sealer and dip wood coatings. It is used in leather coatings, flexo and rotogravure printing inks. It is recommended for coatings where only one solvent can be used. This cellulose ester contains 20 % ESO as plasticizer. It is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, resistant to alcoholOffers good mechanical propertiesExhibits rapid solvent evaporation with low solvent retentionProvides excellent binding, transparent hard but flexible fast-drying filmsSoluble in esters, ketones and glycol ethersShows excellent compatibility with most organic solvents, pigments and resins

WALSRODER™ NC CHIPS E375 ESO 20% LN

Nitrocellulose resin developed for sanding-sealer and dip wood coatings. It is used in leather coatings, flexo and rotogravure printing inks. It is recommended for coatings where only one solvent can be used. This cellulose ester contains 20 % ESO as plasticizer. It is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, resistant to alcoholOffers good mechanical propertiesProvides very strong films and excellent binding propertyExhibits rapid solvent evaporation with low solvent retentionSoluble in esters, ketones and glycol ethersShows excellent compatibility with most organic solvents, pigments and resins

WALSRODER™ NC CHIPS E510 ESO 20%

Nitrocellulose resin for sanding-sealer, primer, matt lacquers, buffing finishes and dip wood coatings. It is used in leather, wooden floor and piercing wooden coatings. It is recommended for coatings where only one solvent can be used. This cellulose ester contains 20 % ESO as plasticizer. It is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, resistant to alcoholOffers good mechanical propertiesSoluble in esters, ketones and glycol ethersProvides very strong films with excellent binding and film forming abilityExhibits rapid solvent evaporation with low solvent retentionShows excellent compatibility with most organic solvents, pigments and resins

WALSRODER™ NCE CHIPS 375 ESO 20%

Nitrocellulose resin designed for sanding-sealer and dip wood coatings. It is also used in leather coatings, flexo and rotogravure printing inks. It is recommended for coatings where only one solvent can be used. This cellulose ester contains 20 % ESO as plasticizer. It is obtained from natural wood and cotton linters.Benefits:Odorless, non-toxic, phlegmatized, resistant to alcoholProvides very strong films and excellent binding propertyOffers good mechanical propertiesExhibits rapid solvent evaporation with low solvent retentionSoluble in esters, ketones and glycol ethersShows excellent compatibility with most organic solvents, pigments and resins