Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

    678 results found

    Sort by

    Fluoroelastomer (FKM) designed for injection, transfer and compression molded goods requiring best fluids resistance. It is suitable for blending with Viton™ GF-600S for injection molding. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Low viscosity, 70% fluorine, peroxide-curedOffers heat, fluid and low temperature resistanceImproves mold release and mold fouling propertiesProvides high elongation, both original and aged compoundsExhibits improved water resistance and lower volume swell in waterShows excellent compression set resistance with low or no post-cureMooney Viscosity (ML 1 + 10 at 121 °C) is 25

    Fluoroelastomer used in rubber applications. It is suitable for injection molding.Benefits:Provides excellent fluid resistance to aromatic hydrocarbons and alcohols including methanol and ethanol, biodiesel, oils, hot water, steam and acids as wellCompatible with latest EV fluids and most common battery electrolytesExhibits excellent physical properties with high elongationIt contains no or low filler even after agingIt shows outstanding compression set resistance with either low or no post-cureIdeal for blending with Viton™ GF-600S A to reach Intermediate viscosity ranges for injection moldingIt is manufactured without fluorinated surfactant

    Fluoroelastomer (FKM) designed for compression molded goods requiring best fluids resistance. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Peroxide-cured, 70% fluorine, easy processing gradeProvides exceptionally fast curing, improved processabilityShows excellent compression set resistance with low or no post-cureImproves mold flow, less shear sensitivityDelivers high elongation both original and agedMooney Viscosity (ML 1 + 10 at 121 °C) is 65

    Fluoroelastomer (FKM) designed for bonded fuel systems parts. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low temperature, low viscosity, peroxide-cured, 67% fluorineOffers improved water resistance, low swelling, less shear sensitivityProvides exceptionally fast curing, high elongation both original and aged compoundsImproves mold release, mold flow and mold fouling propertiesShows excellent compression set resistance with low or no post-cureMooney Viscosity (ML 1 + 10 at 121 °C) is 25

    Fluoroelastomer (FKM) designed for bonded fuel systems parts. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low temperature, peroxide-cured, 67% fluorineOffers improved water resistance, low swelling, less shear sensitivityImproves mold release, mold flow and mold fouling propertiesShows excellent compression set resistance with low or no post-cureProvides exceptionally fast curing, high elongation both original and aged compoundsMooney Viscosity (ML 1 + 10 at 121 °C) is 65

    Fluoroelastomer (FKM) designed for injection and transfer molded automotive fuel, chemical and petroleum industry seals. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low temperature, peroxide-cured, 64% fluorineProvides improved water resistance, low swelling, less shear sensitivityOffers exceptionally fast curing, high elongation both original and aged compoundsImproves mold release, mold flow and mold fouling propertiesShows excellent compression set resistance with low or no post-cureMooney Viscosity, ML 1 + 10 at 121 °C is 25

    Fluoroelastomer (FKM) for transfer and compression molded automotive fuel, chemical and petroleum industry seals. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:64% fluorine, peroxide-cured, low temperature gradeProvides improved water resistance, low swelling, less shear sensitivityOffers exceptionally fast curing, high elongation both original and aged Shows excellent compression set resistance with low or no post-cureImproves mold release, mold flow and mold fouling propertiesMooney Viscosity (ML 1 + 10 at 121 °C) is 65

    Fluoroelastomer (FKM) recommended for low permeation fuel and filler neck hose for automotive and small engines.Benefits:Offers high quality and smooth extrudate surfaceProvides excellent green strength and fuel permeation resistanceExhibits good tensile strength and adhesion to other elastomers in multilayer hoses

    Let’s build your next solution together

    Get Support

    Let’s build your next solution together

    Guiding you through every stage of your innovation journey.

    Contact-us