Plastics Additives

Additives and polymers to improve performance, processing and sustainability. Serving a wide range of plastic applications and industries.

Plastics Additives

    429 results found

    Sort by

    Polymerization initiator used for controlled rheology polypropylene (CR-PP) and LDPE production. It is based on peroxide.Benefits:Listed on TSCA inventory

    Polymerization initiator used for controlled rheology polypropylene (CR-PP) production in the temperature range of 200-250°C. It is based on peroxide.Benefits:Supplied in beads form for accurate dosage to the polymerListed on TSCA inventoryHelps to control polymer’s Melt Flow Index (MFI)

    Crosslinking agent designed for use in polyolefins. It is a pure monofunctional peroxide in liquid form. Benefits:Listed on TSCA inventoryTypical crosslinking temperature: 220°C (rheometer t90 about 12 min.)

    Polymerization initiator suitable for use in styrene, butadiene, acrylonitrile, acrylates and methacrylates. It is also used for curing unsaturated polyester and vinyl ester resins at room temperature as well as elevated cure of non-promoted resins.Benefits:Listed on TSCA inventory

    Polymerization initiator suitable for Low Density Polyethylene (LDPE) production. It can be used as a crosslinking agent for compounds that can crosslink immediately after mixing. It is a pure peroxide in liquid form.Benefits: Listed on TSCA inventory

    Polymerization initiator suitable for use in ethylene, styrene, acrylonitrile, vinylacetate, and (meth)acrylates. It is also used as a curing agent for unsaturated polyester resin at elevated temperatures.Benefits:Listed on TSCA inventory

    Crosslinking agent for use in polyolefins. It also acts as a polymerization initiator for ethylene, styrene, acrylates and methacrylates. It can be used for curing of unsaturated polyester resins at elevated temperatures. It is a pure peroxide in liquid form.Benefits:Listed on TSCA inventory

    Crosslinking agent for use in polyolefins. It is a monofunctional peroxide and supplied as 50% formulation on an inert carrier system in powder form. Benefits:Listed on TSCA inventoryTypical crosslinking temperature: 140°C (rheometer t90 about 12 min.)

    Let’s build your next solution together

    Get Support

    Let’s build your next solution together

    Guiding you through every stage of your innovation journey.

    Contact-us