Rubber

VITON™ AL576C

Fluoroelastomer (FKM) precompound suitable for automotive fuel injector O-rings. It is a terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene plus cure chemicals. It is based on 66% fluorine copolymer gums and improved rheology polymers (IRP). It contains a proprietary process aid package. Benefits:Provides more efficient, cost-effective processing with reduced scrap and longer periods between mold cleaningGives the best balance of low temperature flexibility, automotive fuel resistance, and heat resistanceImparts improved processing characteristics 

VITON™ AL600

Fluoroelastomer (FKM) used in fuel systems, such as fuel injector O-rings. It is also suitable for injection & transfer molding of O-rings, gaskets, and other sealing devices. It is designed for use in extruded cords, profiles & tubing or calendered sheets and solution coatings of fabrics & other substrates. It is an AL-family gum terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene.Benefits:Provides higher viscosity, improved mold flow and better mold releaseOffers less mold fouling, improved compression set resistance and good low temperature characteristicsDemonstrates improved processing 

VITON™ B135C

Fluorinated hydrocarbon rubber (FKM) precompound intended for use in molding applications that require bonding to metal inserts. It is a terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene with cure chemicals. It is based on 68.5% fluorine gums.Benefits:Offers excellent heat and fluid resistance Contain a proprietary cure system, bonding promoter, and process aid packageImparts improved processing characteristics Provides a wide processing window combined with easy mold release and low mold fouling

VITON™ B202

Fluoroelastomer (FKM) designed to be cured with either Viton™ Curative No. 30 or Viton™ Curative No. 50. It is used for transfer- & injection molding of complex shapes, extrusions (e.g., fuel hose and tubing) and solution coatings of fabrics, tanks, or chemical containers. It is a low viscosity, B-type gum terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene.Benefits:Demonstrates improved processing and rheology Provides increased mold flow and excellent mold release

VITON™ B435C

Fluorinated hydrocarbon rubber (FKM) precompound suitable for molding applications that require bonding to metal inserts. It is based on 68.5% fluorine gums. It is a terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene with cure chemicals.Benefits:Provides a wide processing window combined with easy mold release and low mold foulingContain a proprietary cure system, bonding promoter, and process aid packageOffers excellent heat and fluid resistance Imparts improved processing characteristics 

VITON™ B50

Fluorinated hydrocarbon rubber (FKM). It is a vitan B polymer.

VITON™ B600

Fluoroelastomer (FKM) highly recommended for molded goods like shaft seals and calendered goods such as flue duct expansion joints. It is a gum polymer especially suited to curing with bisphenol system. Benefits: Displays improved compression set resistance, terpolymer processing & compression molding, extrusion and calendering Shows easier mold release & increased mold flow and cure rate Demonstrates lower compound viscosity, excellent heat and fluid resistance characteristicMooney Viscosity, ML (1+10) at 121 °C is 65

VITON™ B601C

Terpolymer Fluoroelastomer (FKM) used in O-rings, gaskets and other molded parts. Benefits: Provides excellent compound flow in compressions, injection and transfer molding parts Offers fully precompounded O-ring curative level, improved compression set and medium to fast cure rate Demonstrates improved processing properties such as better mixing & better mold release with less mold fouling and excellent scorch safety