Rubber

UNILENE® B-120

Tackifier resin for tires, rubber artifacts and polymer modifications. It is also used for solvent-based adhesives, hot melt adhesives (EVA, metallocene PE and PSA), seals and sealants. Benefits:Exhibits improvement in processability, filler incorporation & dispersion Offers mass adhesion with reduced preparation time

UNILENE® BS-130

Tackifier resin developed for tires, rubber artifacts and polymer modifications. It is also applicable for solvent-based adhesives, hot melt adhesives (EVA, metallocene PE and PSA), seals and sealants. Benefits:Exhibits improvement in processability, filler incorporation & dispersion Low in naphthalene content and odorOffers mass adhesion with reduced preparation time

UNILENE® BS-140

Tackifier resin used for tires, rubber artifacts and polymer modifications. It is also suitable for solvent-based adhesives, hot melt adhesives (EVA, metallocene PE and PSA), seals and sealants. Benefits:Exhibits improvement in processability, filler incorporation & dispersion Offers mass adhesion with reduced preparation timeLow in naphthalene content and odor

VAMAC® G

Ethylene methacrylate elastomer suitable for processing by injection, compression and transfer molding. It is designed for flame-retarded, low-smoke, non-halogen wire & cable jackets and in non-halogen, low smoke flooring. It is applicable for automotive components such as powertrain seals & gaskets, rocker cover & piston seals, oil coolant-, power steering- and turbocharger hoses. Other applications include torsional dampers, isolators pads, crancake ventilating tubes, covering for fuels & coolant hoses, O-rings, grommets and spark plug boots.Benefits:Contains small amount of processing aidHalogen-free, possesses excellent vibration damping propertiesProvides high-temperature durability with low temperature flexibilitySuperior oil resistance with service lubricants

VAMAC® GXF

Ethylene methacrylate elastomer for air ducts, hoses and torsional dampers. It is designed for applications requiring long cure time. It is suitable for processing by injection, compression and transfer molding. Benefits:Offers improved high temperature properties, higher compression set and dynamic flex fatigue resistance compared with Vamac® GMooney Viscosity ML 1+4 at 100 °C is 17.5Contains small amount of processing aid

Vamac® HyPR 5015

Ethylene methacrylate elastomer for seals & gaskets, automotive applications such as turbocharger hoses and molded air ducts. Benefits: Offers high heat resistanceOil resistant gradeMooney Viscosity ML1+4 at 100 °C is 57 

Vamac® Ultra EV

Ethylene acrylic elastomer developed for static & dynamic seals or hoses and tubes. It is also recommended for E-mobility and internal combustion engines. Benefits: It was formerly known as VMX3020It is an intermediate Mooney viscosity grade at 23 MU (ML1+4, 100°C)Provides excellent heat resistance, good physical properties  Offers good low temperature flexibility and very good compression set

VAMAC® ULTRA HT

Ethylene methacrylate elastomer for use in turbo charger hoses, torsional dampers and air ducts.Benefits:Halogen-free gradeOffers improved heat-, flex fatigue-, oil- and tear- resistanceProvides better low temperature flexibility, improved mechanical properties, Mooney Viscosity ML1+4 at 100 °C is 29