Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

  • Sealants, seals & gaskets
  • Reset filters
127 results found

Sort by

Fluoroelastomer (FKM) used in compression molded seals, O-rings, gaskets, and oil-field parts, such as packers. It is a high viscosity dipolymer of hexafluoropropylene and vinylidene fluoride.Benefits: Bisphenol AF and diamine curable Provides vulcanizates with high tensile strength and best resistance to compression set 

Fluoroelastomer (FKM) used in fuel systems, such as fuel injector O-rings. It is also suitable for injection & transfer molding of O-rings, gaskets, and other sealing devices. It is designed for use in extruded cords, profiles & tubing or calendered sheets and solution coatings of fabrics & other substrates. It is an AL-family gum terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene.Benefits:Demonstrates improved processing Provides lower viscosity, improved mold flow and better mold releaseOffers less mold fouling, improved compression set resistance and good low temperature characteristics

Fluoroelastomer (FKM) used in fuel systems, such as fuel injector O-rings. It is also suitable for injection & transfer molding of O-rings, gaskets, and other sealing devices. It is designed for use in extruded cords, profiles & tubing or calendered sheets and solution coatings of fabrics & other substrates. It is an AL-family gum terpolymer of hexafluoropropylene, vinylidene fluoride, and tetrafluoroethylene.Benefits:Provides higher viscosity, improved mold flow and better mold releaseOffers less mold fouling, improved compression set resistance and good low temperature characteristicsDemonstrates improved processing 

Fluoroelastomer (FKM) highly recommended for molded goods like shaft seals and calendered goods such as flue duct expansion joints. It is a gum polymer especially suited to curing with bisphenol system. Benefits: Displays improved compression set resistance, terpolymer processing & compression molding, extrusion and calendering Shows easier mold release & increased mold flow and cure rate Demonstrates lower compound viscosity, excellent heat and fluid resistance characteristicMooney Viscosity, ML (1+10) at 121 °C is 65

Terpolymer Fluoroelastomer (FKM) used in O-rings, gaskets and other molded parts. Benefits: Provides excellent compound flow in compressions, injection and transfer molding parts Offers fully precompounded O-ring curative level, improved compression set and medium to fast cure rate Demonstrates improved processing properties such as better mixing & better mold release with less mold fouling and excellent scorch safety 

Fluoroelastomer (FKM) used in compression, transfer & injection molding of O-rings, gaskets, valve stem, crankshaft seals and complex-shaped parts.Benefits:Provides excellent compound flow in compressions, injection and transfer molding partsDemonstrates improved processing properties and better metal adhesionDisplays fully precompounded with curative & metal adhesion promoter and good metal bonding with standard industrial primersShows improved processing by better mixing & demolding hot tear, increased mold flow and easier mold release with less mold fouling

Curative, accelerator and cross-linking agent used in O-rings, seals, molded shapes, diaphragms, and tubing.Benefits:100% activeIt is optimized for fast curing without significant loss in scorch safety and reduced mold fouling of Fluoroelastomer (FKM)sDisplays decreased metal adhesion

Fluorinated hydrocarbon rubber (FKM) grade used principally in lathe-cut gaskets, double- & triple-lip seals and miscellaneous complicated molded goods. Suitable for tubing, roll covers, coatings and other calendered goods. It can be compounded with curing agents and curative masterbatches.Benefits:Provides improved compression set resistanceOffers good balance of heat and fluid resistanceIt is the polymer of choice for extrusion, mold flow, hot demolding strength and vulcanizate tear strengthIt yields good tensile strength and elongation at high temperaturesMooney Viscosity, ML 1 + 10 at 100 °C is 50

Let’s build your next solution together

Get Support

Let’s build your next solution together

Guiding you through every stage of your innovation journey.

Contact-us