Rubber

Advanced ingredients for rubber compounding and performance optimization. From automotive to industrial and consumer applications.

Rubber

Category

Sub-category

Manufacturer

Brand name

Key features

  • Automotive
  • Reset filters
110 results found

Sort by

Fluorinated hydrocarbon rubber (FKM) grade.

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

Fluorinated hydrocarbon rubber (FKM) grade designed for compression & transfer molding of seals, gaskets, diaphragms and O-rings.Benefits:Provides excellent fluids and permeation resistance to today’s automotive fuelsOffers heat & chemical resistance and excellent compression set resistanceDisplays improved processing, rheology & physical properties, mold release and extrusion performanceShows increased mold flow and less mold fouling 

Fluoroelastomer (FKM) for transfer and compression molding auto lubricating oil and coolant system seals. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low viscosity, 68% fluorine, peroxide-cured, easy processing gradeOffers heat, fluid and low-temperature resistanceProvides exceptionally fast curing, high elongation both original and aged compoundsImproves mold release and mold fouling propertiesExhibits improved mold flow and less shear sensitivityMooney Viscosity (ML 1 + 10, 121 °C) is 25

Fluoroelastomer (FKM) developed for compression molding automotive lubricating oil and coolant system seals. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Easy processing, 68% fluorine, peroxide-cured gradeOffers heat, fluid and low temperature resistanceProvides exceptionally fast curing and high elongation Improves mold release and mold fouling propertiesShows excellent compression set resistance with short (2 hr) or no post-cureExhibits improved mold flow, less shear sensitivity Mooney Viscosity, ML 1 + 10 at 121 °C is 65

Fluoroelastomer (FKM) designed for bonded fuel systems parts. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low temperature, low viscosity, peroxide-cured, 67% fluorineOffers improved water resistance, low swelling, less shear sensitivityProvides exceptionally fast curing, high elongation both original and aged compoundsImproves mold release, mold flow and mold fouling propertiesShows excellent compression set resistance with low or no post-cureMooney Viscosity (ML 1 + 10 at 121 °C) is 25

Fluoroelastomer (FKM) designed for bonded fuel systems parts. It is a copolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene with a cure site monomer. Benefits:Low temperature, peroxide-cured, 67% fluorineOffers improved water resistance, low swelling, less shear sensitivityImproves mold release, mold flow and mold fouling propertiesShows excellent compression set resistance with low or no post-cureProvides exceptionally fast curing, high elongation both original and aged compoundsMooney Viscosity (ML 1 + 10 at 121 °C) is 65

Let’s build your next solution together

Get Support

Let’s build your next solution together

Guiding you through every stage of your innovation journey.

Contact-us