Plastics

Polycarbonate 6 (PA 6) is suitable for plastic applications.Benefits:It is a molybdenum disulfide (MoSo2) lubricated gradeUL 94, flame rated HB at 0.75 and 1.6 mm

HF-4395ASTU-PF

HF-4395ASTU-PF is a linear molecular polyether-based thermoplastic polyurethane elastomer. It is mainly suitable for extrusion molding.Benefits:Offers excellent mechanical properties and operational stabilityAdaptable to high humidity environmentsPossesses outstanding cold resistance, yellowing resistance and rebound performance

POKETONE® M630F-UV

POKETONE® M630F-UV is a UV-reinforced, general-purpose polyketone grade suitable for injection molding.Benefits:Offers good UV resistanceIt has low GWPUSP Class VI and RoHs certifiedHalogen and PAHs-freeSVHC compliantUL 94, flame rated HB at 0.8 mmTypical Applications:Recommended for rollers, agricultural equipment and railway component applications.

POKETONE® M630F

POKETONE® M630F is a general purpose, aliphatic polyketone grade suitable for injection molding.Benefits:Classified as an engineering thermoplastic, due to mechanical propertiesExhibits excellent balance of stiffness and toughness over a broad temperature rangeOffers high resilience and good wear resistanceHas very good processability and good impact resistance with good creep performanceIt can withstand short-term exposure to elevated temperaturesProvides high resistance to hydrocarbons, solvents, salt solutions, weak acids and weak basesEasy to process on standard injection molding equipmentIt generally has short cycle timeShows good mold definition with glossy mar-resistant surfacesTypical Applications:Ideal for industrial and consumer appliance market. It is also suitable for water related part and food contact applications.

HF-3385AUF-1

HF-3385AUF-1 is a linear molecular polyester-based thermoplastic polyurethane (TPU) for plastic applications.Benefits:Offers wide operating temperature and excellent stabilityTypical Applications:It is applicable for ETPU and batch foaming. It is suitable for processing by injection molding.

HF-4385AFR-2 is a linear molecular polyether-based TPU for plastic applications.Benefits:Offers high mechanical strength, low operating temperature and good flame retardancyTypical Applications:It can be used in film, fire pipes and wires. It is suitable for processing by extrusion.

TECOMID® NC40 GR30 NL XA68

TECOMID® NC40 GR30 NL XA68 is a polyamide (PA) 6-6/6 grade.Benefits:Filled with 30% glass fiberIt is natural, heat stabilized and flame retardantHalogen- and red phosphorus-freeUL 94, flame rated V0 at 1.6 mm and 3.2 mm

TECOLEN® OE20 BK111 EC 0F

Polyethylene possibly used for metal replacement, automotive, conductive and daily life applications.Benefits:Provides very good chemical resistanceExcellent impact resistanceExhibits easy processing, low moisture absorption and density