Rubber

VITON™ CURATIVE No. 50

Curative, accelerator and cross-linking agent used in O-rings, seals, molded shapes, diaphragms, and tubing.Benefits:100% activeIt is optimized for fast curing without significant loss in scorch safety and reduced mold fouling of Fluoroelastomer (FKM)sDisplays decreased metal adhesion

VITON™ E45

Fluorinated hydrocarbon rubber (FKM) grade used principally in lathe-cut gaskets, double- & triple-lip seals and miscellaneous complicated molded goods. Suitable for tubing, roll covers, coatings and other calendered goods. It can be compounded with curing agents and curative masterbatches.Benefits:Provides improved compression set resistanceOffers good balance of heat and fluid resistanceIt is the polymer of choice for extrusion, mold flow, hot demolding strength and vulcanizate tear strengthIt yields good tensile strength and elongation at high temperaturesMooney Viscosity, ML 1 + 10 at 100 °C is 50

VITON™ E60

Fluorinated hydrocarbon rubber (FKM) grade used principally in molded O-rings, packings and shaft seals. Suitable for tubing, roll covers, coatings and other calendered goods.Benefits:It is the polymer of choice for maximum compression set resistance and tensile strength Offers good balance of heat and fluid resistanceIt also performs well for extrusion, elongation and mold flow Mooney Viscosity, ML 1 + 10 at 100 °C is 60

VITON™ E60C

Fluorinated hydrocarbon rubber (FKM) grade for maximum compression set resistant applications.

VITON™ ETP600S

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

VITON™ ETP600S A

Fluorinated hydrocarbon rubber (FKM) grade designed for compression and transfer molding. It can be used in diaphragms, gaskets and O-rings. Recommeded for automotive oil seals & turbocharger hoses, aircraft engines & fuel systems and downhole hydraulic systems in oil exploration.Benefits:Provides outstanding resistance to harsh fluids & heat-, chemical- and environmental-resistanceExhibits excellent resistance to compression set, acids, hydrocarbons & low molecular weight esters, ketones and aldehydesIt is inherently resistant to attack by high pH fluids & base materials and shows low-temperature flexibilityDisplays improved seal performance, extrusion performance, mold flow, faster cure rates & mold release and fouling for efficient manufacturingMooney Viscosity, ML 1+10 at 121 °C is 60

VITON™ F605C

Fluorinated hydrocarbon rubber (FKM) grade designed for compression & transfer molding of seals, gaskets, diaphragms and O-rings.Benefits:Provides excellent fluids and permeation resistance to today’s automotive fuelsOffers heat & chemical resistance and excellent compression set resistanceDisplays improved processing, rheology & physical properties, mold release and extrusion performanceShows increased mold flow and less mold fouling 

VITON™ GAL200S

Fluoroelastomer (FKM) developed for injection, transfer and compression molded goods. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene with a cure site monomer.Benefits:Low viscosity, 66% fluorine, peroxide-curedOffers low temperature, water, steam and coolant resistanceProvides fast curing, high elongation both original and agedImproves mold release and mold fouling propertiesDelivers excellent compression set resistance with either low or no post-cureMooney Viscosity (ML 1 + 10, 121 °C) is 25