Rubber

Silopren™LSR 2020

Silopren™ LSR 2020 TP3364 is a standard two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high thermal stability, excellent biocompatibility and good rubber-like propertiesIt is sterilizable with ethylene oxide, steam and gamma radiationImparts long service life at dynamic stress and outstanding resistance to agingIt shows high stability to ozone and ultraviolet lightProvides excellent stability and flexibility at low temperaturesPossesses excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesTypical Applications:Ideal for various elastomeric articles such as O-rings, stoppers, sealing elements and swimming caps. It is also suitable for vibrator dampening elements and parts of medical technical equipment. 

Silopren™LSR 2010

Silopren™ LSR 2010 TP3740 is a standard two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high transparency, high thermal stability and outstanding resistance to ageingProvides excellent stability and flexibility at low temperaturesIt shows high stability to ozone and ultraviolet lightImparts excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesTypical Applications:Ideal for various elastomeric articles such as stoppers, vibration dampers and shoe inserts.

Silopren™LSR 2750

Silopren™LSR 2750 TP3824 is a two-component liquid silicone rubber for injection molding.Benefits:No special mold treatment needed, It shows primer-less adhesion to many substratesProvides excellent thermal stability, high flexibility at low temperaturesExhibits favorable aging behavior & weathering resistance, good dielectric and mechanical properties Easily pigmentable due to translucent colorTypical Application:Suitable for elastomeric articles such as sealing elements, automotive connectors, membranes and vibration dampening elements.

Silopren™LSR 2080

Silopren™ LSR 2080 is a standard two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high thermal stability, good rubber-like properties and outstanding resistance to ageingProvides excellent stability and flexibility at low temperaturesIt shows high stability to ozone and ultraviolet lightIt has long service life at dynamic stressImparts excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesCompliant with 21 CFR 177.2600Listed the BfR recommendation XV “Silicones”Typical Applications:Ideal for various elastomeric articles such as sealing elements, O-rings, stoppers and vibration dampers.

Silopren™LSR 7080HP

Silopren™LSR 7080HP is an optically clear, platinum cured, liquid silicone rubber (LSR). It has a shelf life of 563 days.Benefits:It is a cross linkable and two-component resin and is available as 1:1 ratio by weightExhibits excellent heat resistance, low to no flash, short vulcanization time and easy de-moldingIt has a lower impact on the environmentOffers good electrical conductivity with deep and thin-section cure capabilityIt is suitable for processing by injection moldingTypical Applications:It is used for automotive, aerospace, consumer goods, electrical and electronic applications. It is also s also used for energy and healthcare applications.

Silplus™ 40 HS

Silplus™ 40 HS is a one-component, heat cured silicone rubber (HCR) based on peroxide catalyst system. It has a shelf life of 730 days.Benefits:Possesses high strength, enhanced mechanical performance, low hysteresis and high resilienceIt is a ready-to-use, one-component resinExhibits low compression set, high clarity and good processabilityOffers rapid cure times and relatively low odor during fabricationIt can be processed by injection, compression & transfer molding, extrusion and calendaringConforms to FDA 21 CFR 177.2600 for indirect food contact, USP Class VI, ISO 10993 part 6, 10 & 11 testing and BfR XV requirementsTypical Applications:It is suitable for consumer goods, electrical/electronics, energy and healthcare. It can also be used in automotive, aviation and aerospace.

Silplus™ 70 HT

Silplus™ 70 HT is a high temperature, heat-cured silicone rubber (HCR). It has a shelf life of 730 days.Benefits:It is based on peroxide catalyst systemExhibits enhanced mechanical performance, low hysteresis and high resilienceIt is a ready-to-use, one-component resinOffers rapid cure times and relatively low odor during fabricationShows low compression set, high clarity and good processabilityIt can be processed by injection, compression & transfer molding, extrusion and calendaringTypical Applications:Ideal for automotive, aviation and aerospace. It is also suitable for consumer goods, electrical/ electronics, energy and healthcare. 

Silopren™LSR 2040

Silopren™ LSR 2040 is a standard two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high thermal stability, good rubber-like properties and outstanding resistance to ageingProvides excellent stability and flexibility at low temperaturesIt shows high stability to ozone and ultraviolet lightIt has long service life at dynamic stressImparts excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesKTW and WRAS approvedCompliant with 21 CFR 177.2600Listed the BfR recommendation XV “Silicones”UL 94, flame rated HBTypical Applications:Ideal for various elastomeric articles such as sealing elements, O-rings, diaphragms, keypads, pacifiers and baby teats. It is also suitable for vibration dampers, nose pads, air vent flaps and cable connectors.