Plastics

PCR PP P601H is a post-consumer recycled polypropylene resin suitable for extrusion and injection molding. Shelf life: 2 years.Benefits:Its source stream consists of unpigmented post-consumer recycled PP cups and food containersIt can be reprocessed with odor improvement processesIt is GRS-, TÜV-RMV-, and PIDC-PRM-certifiedComplies with FDA 21 CFR Part 177.1520(c)(1)(i)(a), RoHS, and REACH regulationsTypical Applications:Recommended for packaging bottle, thin sheet, woven bag, closure and stationery.

BYNEL™ 4104

Anhydride-modified, linear low-density polyethylene resin for boil-in-bag structures, blow-molded containers, bag-in-box films and film where LLDPE is the heat seal layer. It is used in conventional extrusion and coextrusion processes like blown film, cast film & sheet and blow molding. Other coextrusion processes are melt & solid-phase thermoforming and sheet & tubing.Benefits:Offers improved thermal resistance, drop strength, clarity and toughnessAdheres to EVOH, polyamide, PE and ethylene copolymersComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 4105

Anhydride-modified, linear low-density polyethylene resin for boil-in-bag structures, blow-molded containers, bag-in-box films and film where LLDPE is the heat seal layer. It is used in conventional extrusion and coextrusion processes like blown film, cast film & sheet and blow molding. Other coextrusion processes are melt & solid-phase thermoforming and sheet & tubing.Benefits:Adheres to EVOH, polyamide, PE and ethylene copolymersProvides improved thermal resistance, drop strength, clarity and toughnessComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 4109

Anhydride-modified, linear low-density polyethylene resin for boil-in-bag structures, blow-molded containers, bag-in-box films and film where LLDPE is the heat seal layer. It can be used in conventional extrusion and coextrusion processes like melt & solid-phase thermoforming and sheet & tubing. Other coextrusion processes are blown film, cast film & sheet and blow molding.Benefits:Adheres to EVOH, polyamide, PE and ethylene copolymersProvides improved thermal resistance, drop strength, clarity and toughnessComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 4157

Anhydride-modified, linear low-density polyethylene resin for blow-molded containers, boil-in-bag structures, bag-in-box films and film where LLDPE is the heat seal layer. It can be used in conventional extrusion and coextrusion processes like melt & solid-phase thermoforming and sheet & tubing. Other coextrusion processes are blown film, cast film & sheet and blow molding.Benefits:Offers improved thermal resistance, drop strength, clarity and toughnessAdheres to EVOH, polyamide, PE and ethylene copolymersComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 4164

Anhydride-modified, linear low-density polyethylene resin for blow-molded containers, boil-in-bag structures, bag-in-box films and film where LLDPE is the heat seal layer. Used in conventional extrusion and coextrusion processes like melt & solid-phase thermoforming and sheet & tubing. Other coextrusion processes include blown film, cast film & sheet and blow molding.Benefits:Exhibits improved thermal resistance, drop strength, clarity and toughnessAdheres to EVOH, polyamide, PE and ethylene copolymersComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 41E687

Anhydride-modified, linear low-density polyethylene resin for blow-molded containers, boil-in-bag structures, bag-in-box films and film where LLDPE is the heat seal layer. Used in conventional extrusion and coextrusion processes like melt & solid-phase thermoforming and sheet & tubing. Other coextrusion processes include blown film, cast film & sheet and blow molding.Benefits:Adheres to EVOH, polyamide, PE and ethylene copolymersExhibits improved thermal resistance, drop strength, clarity and toughnessComplies with Food and Drug Administration Regulation 21 CFR 175.105

BYNEL™ 41E710

Anhydride-modified, linear low-density polyethylene resin for bag-in-box films, film where LLDPE is the heat seal layer, blow-molded containers and boil-in-bag structures. Used in conventional extrusion and coextrusion processes blown film, cast film & sheet and blow molding. Other coextrusion processes include melt & solid-phase thermoforming and sheet & tubing.Benefits:Adheres to EVOH, polyamide, PE and ethylene copolymersDisplays improved thermal resistance, drop strength, clarity and toughnessComplies with Food and Drug Administration Regulation 21 CFR 175.105