Industrial specialties

SF1154 POLYDIMETHYLDIPHENYL SILOXANE FLUID

Silicone fluid for high temperature heat transfer applications and acts a base fluid in high temperature greases. It is also used as dielectric coolant, high temperature ultrasonic coupler, high temperature heat bath and oxide protector for solder baths. Benefits:Service temperature ranges from -40 °C to 260 °COffers good heat stabilityPossesses low volatility and high flash point

SF 1188A

Silicone oil designed for mold release, textile and paint industrial applications.Benefits:Exhibits solubility in cold and warm water (below 48°C) formulationsOffers good lubricating and release propertiesSoluble in acetone, toluene, lower alcohols and some hydrocarbons

SF 1705

Silicone fluid designed for mold release, textile, leather and paint industrial applications. It is a 50% active solution of aminosiloxane polymer in solvent. Benefits:Easy to use Allows fast curing propertiesOffers good durability and detergent resistance

SF 1706

Silicone fluid for many liquid and paste type auto polishes. It is suitable for both oil-in-water or water-in-oil type emulsion products. It is a curable polymer that contains amine functional and dimethylpolysiloxane units.Benefits:Provides tough elastic filmAllows fast curingExhibits resistance to detergent and durability 

SF 69

Silicone-fluid designed for special industrial applications. It is used in both high viscosity and in air-dry coatings. It is also used to increase the wetting ability of spray coatings. It is a blend of silanol fluid and cyclic silicone. Benefits:Possesses low viscosity and lower surface tension than other silicone fluidsSoluble in most solventsImproves coating surface characteristics

SF 99

Silicone fluid for special industrial applications. It is used to create a water repellent film on glass or ceramics for reliable operation of electronic equipments in temperature and humidity change.Benefits:Soluble in wide range of solventsOffers excellent water repellency and improves durability in coatingsPossesses low viscosity

SILBREAK™ 322 SILICONE DEMULSIFIER

Silicone-based demulsifier used for crude emulsions that are difficult to break such as heavy or high TAN crudes.Benefits:Provides reduced sludgeExhibits increased speed of separationAllows low temperature demulsification with paraffinic crudes

SILBREAK™ 638

Silicone demulsifier and foam control agent for separation of water from crude oil particularly during the initial phase of separation and for use in gas/oil separators. It is used in water-in-oil emulsions, control foam in oil-based systems. Benefits:Halogen- and phenolic derivatives freePossesses low BSWCan be easily blended with organic demulsifiers