Coatings, Inks & Construction

K-STAY® 511

K-STAY® 511 is a liquid thixotrope used in coating applications. It acts as a rheology modifier. Shelf life: minimum 24 months.Benefits:It is pourable and easy to use in productionIt prevents hard settlingOffers excellent performance in polar formulationsProvides excellent sag resistanceIt is highly efficient and requires low dosage levels to improve pigment suspension and sag controlIt has no negative effects on final film propertiesTypical Applications:Ideal for pigmented solvent-borne and high solid coatings. It is effective in wide range of solvent-borne formulations including acrylics, polyesters, urethanes, alkyds and epoxies.

TEGO® FLOW ZFS 460

TEGO® Flow ZFS 460 is a flow and leveling agent designed for solvent-based pigmented coatings. Shelf life: 48 months.Benefits:It is a silicone-free acrylic additiveProvides heat resistanceOffers defoaming propertiesIt has low slip and anti-blocking effectCompliant with FDA regulation 21 CFR 175.300Typical Applications:Ideal for architectural, screen-printing, coil and general industrial coating applications. It is partially suitable for 100% solid two-component system and varnishes.

TEGO® DISPERS 1010

TEGO® Dispers 1010 is a polymeric wetting and dispersing agent designed for pigments, inks and paints. Shelf life: 24 months.Benefits:Offers outstanding viscosity reduction and color intensity with inorganic particles100% active, solvent-freeEspecially suitable for low polarity solventsTypical Applications:It is applicable in inkjet inks, architectural paints and pigment concentrates. It is suitable for resin-free pigment concentrates, high solids and direct-grind of solvent-based formulations. It can be used for radiation curing.

ACEMATT® HK 450

ACEMATT® HK 450 is a matting agent for coating applications. Shelf life: 24 months.Benefits:It is an untreated, coarse particle sized precipitated silicaHighly efficient with good transparencyLow sheenOffers good viscosity, sedimentation behavior and smoothnessTypical Applications:Ideal for coil, general industrial, floor coatings and architectural paints. Suitable for solvent, pigmented coatings and partially suitable for 2 pack and high solids.

CHS-ALKYD® LA 810

CHS-ALKYD® LA 810 is a long-oil alkyd resin suitable for high-solid coatings. Shelf life: 12 months.Benefits:It is based on linoleic acidIt is delivered as a low viscosity (100%) solutionTypical Applications:Ideal for fast air-drying and decorative coatings. It is recommended for wood coatings, stains, impregnations, topcoats, elastic enamels and wood protective coatings.

MICHEM® GUARD 349.E

Waterborne applications for building paints, exterior wood protection, industrial & institutional coatings and inks. Recommended for industrial wood & plastic, interior furniture & floor and overprint varnishes. It is a non-ionic polyethylene dispersion.Benefits:Solvent-freeImparts resistance to scratch, rub, block, abrasion and marOffer slip and matting properties

MICHEM® PRIME 4983 R-HSA

Adhesion promoter designed for OPV, industrial wood and plastic coatings. It is used as tie coat and primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent and heat sealable coating. It is a high solids dispersion and suitable as nonwoven binder.Benefits:Offers outstanding adhesion to metallic and cellulosic substratesProvides water, grease, oil and solvent resistanceImparts chemical resistance, heat seal and thermal transfer release

CHS-ALKYD® ST 790 NN 75 is a long-oil alkyd resin for high-solid coating applications. Shelf life: 12 months.Benefits:It is a low-VOC, polyamide-type soft thixotropic gelIt is based-on vegetable drying oilIt is delivered as a low viscosity (75%) solution in dearomatized white spirit with flash point higher than 61°CContains <1% aromatic contentTypical Applications:Ideal for clear lacquer and wood glazing applications.