Coatings, Inks & Construction

PROTECTOSIL® WA CIT

PROTECTOSIL® WA CIT is a corrosion inhibitor. It has a shelf life of 12 months.Benefits:It is a waterborne emulsion which is based on a multifunctional silane system It can effectively protect embedded steel reinforcement against chloride induced corrosionIt can chemically bond to rebar surface and cement matrixReduces drying shrinkage of concreteListed under REACH, PICCS and TSCATypical Applications:Ideal for steel reinforced concrete and prefabricated concrete elements. It can also be used in two component concrete repair mortars according to EN 1504-2 or EN 1504-7. It is also recommended for building materials which are exposed to high chloride environments such as sea water or de-icing salts (e.g. marine constructions, harbors, parking garages, tunnel or highways).

ANTIFOAM PO 300 is a next generation defoamer in powder form suitable for construction applications. It has a shelf life of 12 months.Benefits:Consist of mixtures of mineral oils and eco-sustainable surfactant polymers on mineral baseIt can reduce bubble size even under strong mechanical agitationIts active components are very resistant to strongly basic pH of the cementIt starts the deforming process immediately with mixing Provides perfectly planar appearance without surface cratersTypical Applications:Ideal for strongly reducing air on a wide range of cement mixtures. It is also suitable for self-levelling mortars rich in polymers or particularly viscous.

PENTA EC 25 M is a cellulose ether suitable for construction applications. It has a shelf life of 12 months.Benefits:Modifies rheology by improving viscosity and water retentionOffers long workability time and good smooth runningThe surface modification of the product gives wet mixtures that are highly plastic, thixotropic and easy to applyIt does not affect wet adhesionEliminates irritating surface peelingIt is quickly soluble in water both in a neutral and alkaline systemsTypical Applications:Ideal for preparation of cement and both lime-based and gypsum-based plasters. It is suitable for smooth finish mixtures applicable by machine. Recommended for formulas containing crushed aggregates rich in fine particles. 

TEXICRYL® 13-619

Styrene acrylic copolymer emulsion suitable for construction applications. It is used in the formulation of high-performance water-resistant tile adhesives, fix & grouts and general-purpose fillers.

CLAYMINTON® PT-02

Rheology modifier designed for construction system such as mortar, EFIS, putty, plaster as well as gypsum-based grouts and tile adhesive etc. It is a high purity refined bentonite clay with higher active and whiteness. Shelf life: 4 years. Benefits:It is easy to use and cost effectiveIt is a non-toxic, odorless and eco-friendly green productReduces the stickiness on the tool and has good thixotropy efficiency and sag controlOffers excellent lubricity and enhances pumpability by the reduction of the pumping pressureProvides good dispersibility, excellent shear-shinning efficiency, good thickening efficiency and water retentionIt shows excellent storage stability

CLAYMINTON® PT-05

Rheology modifier suitable for construction system such as mortar, EFIS, putty, plaster as well as gypsum-based grouts and tile adhesive etc. It is a super refined bentonite clay with higher active and whiteness. Shelf life: 4 years. Benefits: It is cost effective, non-toxic, odorless and eco-friendly  Provides good dispersibility, excellent shear-shinning efficiency, good thickening efficiency and water retentionIt shows excellent long term storage stabilityReduces the stickiness on the tool and has good thixotropy efficiency and sag controlExhibits excellent lubricity and enhances pumpability by the reduction of the pumping pressure

CAB 531-1

Cellulose acetate butyrate developed for general industrial & maintenance, consumer electronics and transportation coatings. Used in ace machinery & equipment, aerosol, exterior architectural and auto OEM coatings. Applicable in protective and refinish coatings. Suitable for coil, leather, metal & pack and carton coatings. Recommended for overprint varnishes & commercial, gravure and flexographic printing inks. It can also be used for paints & roofing and factory-applied wood coatings.Benefits:Offers improved compatibilitySoluble in wide range of solvents

STANDART® CHROMAL I

Leafing aluminum silver pigment is used in screen printing inks and solvent-based systems. It is suitable for aerosols, automotive accessories, can coatings and decorative paints. It is also suitable for chrome effects, corrosion protection, roof coating and heat resistant & marine paints.