Rubber

SAFIC-CHEM C5-98P

Tackifier resin used in rubber applications. It is a light yellow, aliphatic C5 hydrocarbon resin. Shelf life: 24 months.Benefits:It provides a very good balance of tack, peel and cohesive strengthIt is compatible with less-polar polymers, elastomers especially SIS, natural rubber, butyl rubber and EVA

VULCOFAC® 633 MB75

Curing agent recommended for timing belts, V belts, rubber rolls, and other elastomers. It is suitable for processing at high temperature. Shelf life: 6 months.Benefits:Provides scorch safety, low blooming, high tensile strengthOffers low load bearing strength, low compression set properties  Imparts excellent adhesion of rubber to metal

VULCOFAC® 6498 DL70

Special curing agent used in rubber applications. It is an excellent compatibilizer between inorganic fillers and organic polymers. Shelf life: 12 months.Benefits:Dry liquid vinyl silane concentrate (oligomeric siloxane)Composed of 70% polysiloxane, containing vinyl and ethoxy groups blended with 30% silicon dioxide

VULCOFAC® FC5157 E

Vulcanizing agent used as a cure system for polyepichlorohydrin elastomers. Shelf life: 36 months.

VULCOFAC® TMPTMA R DL75

Coagent for use in peroxide and E.B. curing processes. It is suitable for elastomers including CPE, EPDM, nitrile, CPE and silicones. It is a tri-functional methacrylic monomer. Shelf life: 12 months.Benefits:Contains retarder

Accelerator used for the rapid vulcanization of synthetic and natural rubbers such as SBR, NBR, EPDM, CR and NR. Shelf life: 12 months.Benefits:Zinc-amine cluster on a carrier systemProvides high cross-linking density, good tension values and low compression setOffers no migration and no formation of nitrosamine

Silopren LSR 2030

Silopren™ LSR 2030 is a two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high thermal stability, good rubber-like properties and outstanding resistance to ageingProvides excellent stability and flexibility at low temperaturesIt shows high stability to ozone and ultraviolet lightIt has long service life at dynamic stressImparts excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesKTW and WRAS approvedCompliant with 21 CFR 177.2600Listed the BfR recommendation XV “Silicones”UL 94, flame rated HBTypical Applications:Ideal for various elastomeric articles such as sealing elements, O-rings, stoppers and cable accessories.

Silopren™LSR 2040

Silopren™ LSR 2040 is a standard two-component liquid silicone rubber.Benefits:Exhibits excellent processing properties and is suitable for injection molding processOffers high thermal stability, good rubber-like properties and outstanding resistance to ageingProvides excellent stability and flexibility at low temperaturesIt shows high stability to ozone and ultraviolet lightIt has long service life at dynamic stressImparts excellent dielectric behavior over a wide range of temperaturesIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesKTW and WRAS approvedCompliant with 21 CFR 177.2600Listed the BfR recommendation XV “Silicones”UL 94, flame rated HBTypical Applications:Ideal for various elastomeric articles such as sealing elements, O-rings, diaphragms, keypads, pacifiers and baby teats. It is also suitable for vibration dampers, nose pads, air vent flaps and cable connectors.