Rubber

Silopren™LSR 2740 TP3783

Silopren™ LSR 2740 TP3783 is a two-component liquid silicone rubber for injection molding. It is suitable for cost-efficient manufacturing of high part quantities in integrated processes such as multi-component injection molding or insert-molding.Benefits:Offers primer-less adhesion to many substrates such as metals and engineering plasticsNo special mold treatment needed (final adhesion builds up with time)Provides high temperature stability and flexibility at low temperatureExhibits good aging behavior, weathering resistance, good dielectric and mechanical propertiesEasily pigmentable with LSR color pastesComplies with FDA 21 CFR §177.2600Typical Application:Suitable for the manufacturing of engineering plastics and elastomeric materials need to be combined in an over-molding process, such as sealing elements, membranes, vibration-dampening elements, spatula and other hard-soft combinations.

Silopren™LSR 2742

Silopren™LSR 2742 is a two-component liquid silicone rubber for injection molding.Benefits:It shows primer-less adhesion to predominately polyesters such as PBT but also a wide range of substrates (e.g. engineering plastics, metals) without adhesion to mold during manufacturingOffers lower viscosity, good tear & aging resistance and a higher reactivityProvides excellent thermal stability, high flexibility at low temperatures, stability to ozone and ultraviolet lightExhibits good rubber-like properties, long service life under dynamic stress, and a shorter cycle timeIt has excellent dielectric behavior over a wide temperature rangeIt is not readily combustible and does not melt or dripEasily pigmentable with LSR color pastesComplies with FDA 21 CFR 177.2600, BfR listed, KTW approvedTypical Application:Suitable for the manufacturing of soft/rigid combinations out of engineering plastics and LSR e.g. sealing elements, membranes and shower heads.

Silopren™LSR 2749

Silopren™ LSR 2749 is a two-component liquid silicone rubber for injection molding.Benefits:It shows primer-less adhesion to a wide range of substrates including polycarbonate (PC), polybutylene terephthalate (PBT), co-polyestersProvides excellent thermal stability, high flexibility at low temperaturesNo special mold treatment or substrate surface pre-treatment is required, and the material does not adhere to the moldExhibits favorable aging behavior & weathering resistance, good dielectric and mechanical properties Easily pigmentable with LSR color pastesTypical Application:Suitable for elastomeric articles such as respiratory mask, sealing elements, mobile phone gasket, membranes/diaphragms, connectors, handles/grips, spatula, straps, bellows, vibration dampers and other soft-hard combinations.

Silopren™LSR 3186/50 TP3651

Silopren™ LSR 3186 50 TP3651 is a two-component liquid silicone rubber for injection molding.Benefits:It shows a low compression set after vulcanization without post-curing Offers self-lubricating properties, low viscosity and fast cureProvides high thermal stability, outstanding resistance to aging and easy to colorTypical Application:Suitable for elastomeric articles such as cable seals, grommets, gaskets and plug seals.

Silopren™LSR 3286/50 TP4224

Silopren™ LSR 3286/50 TP4224 is a two-component liquid silicone rubber for injection molding.Benefits:Offers self-lubricating properties, low viscosity and fast cureIt shows a low compression set after vulcanization without post-curingProvides high thermal stability, outstanding resistance to aging and easy to colorTypical Application:Suitable for elastomeric articles such as cable seals, grommets, gaskets and plug seals.

Silopren™LSR 3286/60 TP0125

Silopren™LSR 3286/60 TP0125 is a two-component liquid silicone rubber. It is used in injection molding processes.Key Benefits:The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time which starts between a few hours and one day after vulcanizationIt shows a low compression set after vulcanization without post-curingImparts low compression set without post-cure self-lubricating propertiesOffers low viscosity, fast cure, high thermal stability, outstanding resistance to aging and easy to colorTypical Applications:It is designed for the manufacture of wire harness applications for the following elastomeric articles such as cable seals, grommets, gaskets and plug seals.

Silopren™LSR 3286/70 TP3650

Silopren™ LSR 3286 70 TP3650 is a two-component liquid silicone rubber. It is used in injection molding processes.Key Benefits:The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time which starts between a few hours and one day after vulcanizationImparts low compression set without post-cure self-lubricating propertiesOffers low viscosity, fast cure, high thermal stability, outstanding resistance to aging and easy to colorIt shows a low compression set after vulcanization without post-curing Typical Applications:It is recommended for the manufacture of wire harness applications for the following elastomeric articles such as cable seals, grommets, gaskets and plug seals.

Silopren™LSR 3386/30 TP3616

Silopren™LSR 3386/30 TP3616 is a two-component liquid silicone rubber. It is recommended for injection molding processes.Key Benefits:The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time which starts between a few hours and one day after vulcanizationIt shows a low compression set after vulcanization without post-curingOffers low viscosity, fast cure, high thermal stability, outstanding resistance to aging and easy to colorImparts low compression set without post-cure self-lubricating properties Typical Applications:It is ideal for the manufacture of wire harness applications for the following elastomeric articles such as cable seals, grommets, gaskets and plug seals.